I made this several months ago with the dual purpose of holding my storage containers. Unfortunately a measurement got lost in translation and the width was just a hair too narrow. I then went and routed a dado in the sides for the containers to slide into. Then the sides started bowing out. So, I knew that I would have to redo it eventually and decided to do it this weekend and have it done.
This one turned out much, much better. I put a divider in the middle to better handle the 77# planer and not have anything bow. This also solved another problem, wasted space, as on the other side I can now store all my sandpaper. On this side also is room for a short drawer up top to hold either the sanders or tool wrenches, etc. Probably put a door on this side, and cut semicircles on the other side shelves for easier handle access.
Didn't gain much by redoing it, aside from making me happier. Used up some scrap, so I'm happy. Rock solid now as well.
And my assistant.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
This one turned out much, much better. I put a divider in the middle to better handle the 77# planer and not have anything bow. This also solved another problem, wasted space, as on the other side I can now store all my sandpaper. On this side also is room for a short drawer up top to hold either the sanders or tool wrenches, etc. Probably put a door on this side, and cut semicircles on the other side shelves for easier handle access.
Didn't gain much by redoing it, aside from making me happier. Used up some scrap, so I'm happy. Rock solid now as well.
And my assistant.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Comment