outdoor pizza prep table/ kitchen island.

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • michelevit
    Forum Newbie
    • Dec 2005
    • 26
    • .

    #1

    outdoor pizza prep table/ kitchen island.

    Long time lurker,
    first time poster.

    I thought I'd share this outdoor kitchen island I built to accompany my pizza oven.
    i built this outdoor pizza prep/serving table from remnant materials. Its
    rolls on four locking casters. The countertop is 1.5 inch concrete cast
    upside down and reinforced with rebar.(remnants of the oven build)

    Weight of the concrete countertop slab is just shy of 120 pounds. Weight of
    the entire rolling table is shy of 200.

    All materials are recycled,repurposed, remnant or scrap.
    The two collapable wing extensions are resawn oak from pallets.
    Finished with a simple 1/2 roundover.
    The drawers ride on full extension glides salvaged from a retired office desk.
    The entire project was an experiment in conservation/green building.

    Estimated cost is under 20 dollars. I just need to decide on a stain/finish
    and then make some more pizzas to celebrate.

    My goal was to create a large work surface to take the entire pizza making process (and associated mess) out of the kitchen.

    12.19 square feet of counter-top work area
    7920 cubic inches of storage.

    more pics here...
    http://www.westcoastarcades.com/zenphoto/pizzatable/
    Attached Files
  • LCHIEN
    Super Moderator
    • Dec 2002
    • 22072
    • Katy, TX, USA.
    • BT3000 vintage 1999

    #2
    great! Where's the wood-fired Brick oven?
    Loring in Katy, TX USA
    If your only tool is a hammer, you tend to treat all problems as if they were nails.
    BT3 FAQ - https://www.sawdustzone.org/forum/di...sked-questions

    Comment

    • chopnhack
      Veteran Member
      • Oct 2006
      • 3779
      • Florida
      • Ryobi BT3100

      #3
      Nice! You must love pizza as much as I do
      Check here Loring
      http://www.westcoastarcades.com/zenp...MG0268.JPG.php
      I think in straight lines, but dream in curves

      Comment

      • Pappy
        The Full Monte
        • Dec 2002
        • 10490
        • San Marcos, TX, USA.
        • BT3000 (x2)

        #4
        Great table. No way i would have guessed the top was concrete.
        Don, aka Pappy,

        Wise men talk because they have something to say,
        Fools because they have to say something.
        Plato

        Comment

        • radhak
          Veteran Member
          • Apr 2006
          • 3061
          • Miramar, FL
          • Right Tilt 3HP Unisaw

          #5
          Now that's called skill : create a classic like that, use recycled material to boot, and end up with a Pizza table for heaven's sake! You should have block parties : the kids must think you are god !

          Did you laminate the legs and the stretchers for thickness?

          And I see the much larger pizza oven in your yard. So are you a professional chef or something ?
          It is the mark of an educated mind to be able to entertain a thought without accepting it.
          - Aristotle

          Comment

          • LCHIEN
            Super Moderator
            • Dec 2002
            • 22072
            • Katy, TX, USA.
            • BT3000 vintage 1999

            #6
            Originally posted by chopnhack
            Nice! You must love pizza as much as I do
            Check here Loring
            http://www.westcoastarcades.com/zenp...MG0268.JPG.php

            missed the other pictures... great oven too. Me likee pizza, mmmm.
            Loring in Katy, TX USA
            If your only tool is a hammer, you tend to treat all problems as if they were nails.
            BT3 FAQ - https://www.sawdustzone.org/forum/di...sked-questions

            Comment

            • SARGE..g-47

              #7
              Excellent job. I would definitely get some outdoor finish on that piece for sure as the weather will take a toll. Love your pizza oven also..

              Comment

              • lrogers
                Veteran Member
                • Dec 2002
                • 3853
                • Mobile, AL. USA.
                • BT3000

                #8
                Wow, that is nice. I can see the design being modified slightly for a nice planner table. Like Pappy, I never would have guessed what that top was made of.
                Larry R. Rogers
                The Samurai Wood Butcher
                http://splash54.multiply.com
                http://community.webshots.com/user/splash54

                Comment

                • phrog
                  Veteran Member
                  • Jul 2005
                  • 1796
                  • Chattanooga, TN, USA.

                  #9
                  Very nice job.
                  Richard
                  Richard

                  Comment

                  • cabinetman
                    Gone but not Forgotten RIP
                    • Jun 2006
                    • 15216
                    • So. Florida
                    • Delta

                    #10
                    That's some cool setup. Nice work on the table. Removable wings are a good idea. What did you do to the concrete surface?
                    .

                    Comment

                    • michelevit
                      Forum Newbie
                      • Dec 2005
                      • 26
                      • .

                      #11
                      the concrete was made from a mix of 3 parts sand, 1 part cement.
                      color dye was added to this so the color is all the way through.
                      the surface is just finished with a wax.

                      i'd encourage anyone to try casting concrete countertops. its easy, low cost and fun.
                      as wood workers you have everything necessary to fabricating the molds for casting.

                      Comment

                      Working...