A buddy of mine ran across this plan last fall and couldn't get it out of his head. A few months ago he was asked if he would provide a chair for a "Chairity Auction" to benifit something or another in St Marys, Ga. (Mike owns Hanna's Custom Woodworking)
To make a short story long he asked if I would like to collaborate on the project. We modified the construction alot because neither of us has a Domino machine.
"A" chair ended up as 4 chairs, one for me two for Mike and one for the auction.
Here is a link to the plans we started out with http://www.festoolusa.com/Web_files/...WCM_zigzag.pdf
We used spines and hardwood dowels with epoxy on the joints. Wood is Jatoba (Brazilian Cherry) with maple seat slats. Finish is 3 coats of pre-cat lacquer buffed out with steel wool and waxed with Minwax paste wax. Pat
http://bt3gallery.cpu-etc.com/main.php?g2_itemId=16140
To make a short story long he asked if I would like to collaborate on the project. We modified the construction alot because neither of us has a Domino machine.
"A" chair ended up as 4 chairs, one for me two for Mike and one for the auction.
Here is a link to the plans we started out with http://www.festoolusa.com/Web_files/...WCM_zigzag.pdf
We used spines and hardwood dowels with epoxy on the joints. Wood is Jatoba (Brazilian Cherry) with maple seat slats. Finish is 3 coats of pre-cat lacquer buffed out with steel wool and waxed with Minwax paste wax. Pat
http://bt3gallery.cpu-etc.com/main.php?g2_itemId=16140
Comment