1 1/4 x167 Carbide tipped Bandsaw blades $75

[tommyt654]

Hey gang, Don,t know how many of you have a large enough bandsaw for this but Laguna Tools has a deal on a 1 1/4 inch x .042 inch kerf x 2 t.p.i. x 167 in. Resaw King blades that are Carbide tipped for $75 + shipping. Call Tim Lory @ 1-800-234-1976, ext 9617 and tell him I said hi. These are great resawing blades and the price is right. If you need a smaller blade in that width they will reweld it to length, and if you need a longer just buy 2 blades and then have them reweld again but you,ll have 2 welds per blade but at that price it should still be a good deal, cya,ll Tommy

[LCHIEN]

that would be for a mighty big saw. I calculate 167" would do a 24" wheel and 18" resaw height BS...
.042 kerf is about half of by table saw blade and 1-1/4" blade width is way more than any BS I dream of owning is capable of tensioning. THose popular 14" bandsaws can only tension to about 3/4" and have blade lengths in the 93.5" size.

Must be nice...

[tommyt654]

I believe that size fits 20 inch bandsaws like the MM20.