-
big knot. Cut out of a 2x4. Should I section it in half?
Last edited by LCHIEN; 10-14-2024, 12:22 PM.
Loring in Katy, TX USA
If your only tool is a hammer, you tend to treat all problems as if they were nails.
BT3 FAQ - https://www.sawdustzone.org/forum/di...sked-questions -
I would be curious to see the connection between the two limbs that I see there. That can't be one limb! Or, are my eyes deceiving myself?Hank Lee
Experience is what you get when you don't get what you wanted!
-
It is surely the same knot, to me.
I'm afraid if I cut it, it might come loose. It's pretty solid, now.Loring in Katy, TX USA
If your only tool is a hammer, you tend to treat all problems as if they were nails.
BT3 FAQ - https://www.sawdustzone.org/forum/di...sked-questionsComment
-
After some time in the kiln, you could fill the voids with black epoxy. Sand and polish then coat with Rubio Monocoat. You'll have originated the first "River Paperweight".
Comment
LCHIEN
Comment