Don't you hate it when you have to buy two of every tool, one for metric mm and the other in inches?
Metric tools
Collapse
This topic is closed.
X
X
-
Metric tools
Loring in Katy, TX USA
If your only tool is a hammer, you tend to treat all problems as if they were nails.
BT3 FAQ - https://www.sawdustzone.org/forum/di...sked-questionsTags: None -
One reason I really hate how Sears sold some wrench sets. They sold an SAE and Metric wrench sets (twist wrenches), that allowed decent gripping, at a good leverage length, but neither were a complete set, because of "overlap" sizes (13mm and 1/2"). I bought two sets, expecting to be able to buy the other sizes and leave one on an old tractor, and one with an old VW bug.
Nope.She couldn't tell the difference between the escape pod, and the bathroom. We had to go back for her.........................Twice. -
She couldn't tell the difference between the escape pod, and the bathroom. We had to go back for her.........................Twice.Comment
-
And speaking of generic brands... I'm a trumpet player and a number of years ago put a "Harmon mute" on my Christmas list. Any brass player knows what that is... technically Harmon is a brand, but a "Harmon mute" is a specific type of mute, generically called a "wah-wah" but nobody actually calls it that.
My wife's sister bought me a Harmon-branded straight mute... a completely different type of mute lol. The tool equivalent would be asking for a Crescent wrench, and receiving a pair of slip-joint pliers made by the Crescent company.Comment
-
Can't even count the number of bolt heads I have stripped because I grabbed the wrong crescent wrench!Don, aka Pappy,
Wise men talk because they have something to say,
Fools because they have to say something.
PlatoComment
-
Makes a guy wonder why in the world would anyone design and manufacture a tool, especially an adjustable wrench in both metric and inch markings. I can see that they might put both on the same wrench, but not make two separate tools... What were they thinking? Surely someone along the path of design must have pointed this out.
As a matter of fact, I just took a look at the handful of adjustable wrenches that I have. both my Stanley (87-368) and my Craftsman (44603) are marked in both, 8 in. on one side and 200 mm on the other.
Regarding the name, of the adjustable wrench, everybody I used to work with back when I did such things with my Dad, call them "Crescent" wrenches. Pipe wrenches are also adjustable, but when someone referred to a "Crescent" you knew exactly what they wanted. BTW, I have Craftsman, Stanley, Crescent, McKaig-Hatch, a J.H. Williams "Superjustable", and even a Japanese-made "angle wrench"... all are like the Crescent.
As far as rounding off bolt heads... well, what can I say, except my Dad would have booted me in the butt, it's simply the wrong tool and I was taught that when I was ten or so and trying to remove the wheel from my bike. Dad snatched the Crescent from my hand and told me to never do that again... he handed me his auto wrench bundle and told me to "always use the right tool for the job". Adjustable wrenches are good for a few things but certainly not for hex heads.
CWS
Think it Through Before You Do!Comment
-
Seriously, if you look closely one is a Craftsman and the other is a Pittsburgh.
Both are marked with the HANDLE LENGTH of 10" or 250 mm on opposite sides.
I just picked the wrenches so that when placed the same way (right hand hold) you could see both the inch markings and the mm markings to make a funny picture.Last edited by LCHIEN; 12-19-2021, 02:24 PM.
-
-
Years ago 1991 I bought a set of METRINCH wrenches. They married SAE & Metric into one set. No more going back & forth trying to get the right socket (SAE or Metric) to remove a bolt or nut, they just fit and they grip the sides of the hex not the points of the hex. They are good for taking off rounded nuts or bolts. They were sold on TV, forgot what I paid for it. They were made in Germany and the quality was excellent, I ended up buying a set for my son. My son worked as a auto mechanic at that time and he swears by those wrenches. He and myself still use them, best set of wrenches I own. I always keep um in my Tacoma truck for any emergency when offroading. I haven't seen them advertised anymore but if you can get a hold of a set it'll be well worth it. Best Bang For The Buck!Comment
-
Haha, around here there is a politically incorrect name for these things.
Assume your local ethnic group is the Romulens. Totally stole that from Star Trek, because the Romulens are fictional and there's no one to offend., any resemblance to any living group is in your imagination.
So an adjustable wrench is called a Romulen socket set..
Insert your favorite derogatory name for some ethnic group and its a lot funnier. But, shame on you.Last edited by LCHIEN; 05-26-2017, 12:56 PM.Loring in Katy, TX USA
If your only tool is a hammer, you tend to treat all problems as if they were nails.
BT3 FAQ - https://www.sawdustzone.org/forum/di...sked-questionsComment
Footer Ad
Collapse
Comment