Making the house more comfortable...

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • dbhost
    Slow and steady
    • Apr 2008
    • 9523
    • League City, Texas
    • Ryobi BT3100

    #1

    Making the house more comfortable...

    Here is a question for those that use them... Is it more energy efficient, and comfortable to keep the temp in the house higher, and remove humidity with a dehumidifier than to run the A/C lower? I really don't mind having the house in the upper 70's / low 80's, but I can't take the humidity. I know most of the time in my shop, I have the portable A/C set on dehumidify only, just wondering if I would benefit from a dehumidifier for the house...
    Please like and subscribe to my YouTube channel. Please check out and subscribe to my Workshop Blog.
  • gsmittle
    Veteran Member
    • Aug 2004
    • 2793
    • St. Louis, MO, USA.
    • BT 3100

    #2
    Originally posted by dbhost
    Here is a question for those that use them... Is it more energy efficient, and comfortable to keep the temp in the house higher, and remove humidity with a dehumidifier than to run the A/C lower? I really don't mind having the house in the upper 70's / low 80's, but I can't take the humidity. I know most of the time in my shop, I have the portable A/C set on dehumidify only, just wondering if I would benefit from a dehumidifier for the house...
    Disclaimer

    I'm not an HVAC guy, so any opinion I express is purely speculation.

    /Disclaimer

    That being said, I'm thinking the dehumidifier would probably do you more good for less cost than running the AC all day.

    g.
    Smit

    "Be excellent to each other."
    Bill & Ted

    Comment

    • charliex
      Senior Member
      • Mar 2004
      • 632
      • Spring Valley, MN, USA.
      • Sears equivelent BT3100-1

      #3
      Our central air costs less than $1.25 per day. The dehumidifier at our old location with no central air took almost $3.00 per day. Used in the basement only.
      I keep the temp at 67 but I have to turn it down to 64 2 - 3l times a day to dehumidify. The house is tight and well insulated so if the outside temp is not high enough the air does not run. If the temp is in the upper 90s it will run enough to remove the moisture, upper 80s no go.
      Also dehumidifiers have a positive heat index. They generate more heat than they absorb thus they add heat to the house. Kinda counter productive me thinks. 2 cents worth

      Comment

      • pelligrini
        Veteran Member
        • Apr 2007
        • 4217
        • Fort Worth, TX
        • Craftsman 21829

        #4
        Originally posted by charliex
        Also dehumidifiers have a positive heat index. They generate more heat than they absorb thus they add heat to the house. Kinda counter productive me thinks. 2 cents worth
        That's one of the big factors I was thinking about.
        Erik

        Comment

        • gsmittle
          Veteran Member
          • Aug 2004
          • 2793
          • St. Louis, MO, USA.
          • BT 3100

          #5
          Originally posted by charliex
          Also dehumidifiers have a positive heat index. They generate more heat than they absorb thus they add heat to the house. Kinda counter productive me thinks. 2 cents worth
          Didn't know that, thanks!

          g.
          Smit

          "Be excellent to each other."
          Bill & Ted

          Comment

          • dbhost
            Slow and steady
            • Apr 2008
            • 9523
            • League City, Texas
            • Ryobi BT3100

            #6
            So basically I just need to keep on with the insulation / radiant barrier and calking...

            $1.25 a day is pipe dream territory for me...
            Please like and subscribe to my YouTube channel. Please check out and subscribe to my Workshop Blog.

            Comment

            • jackellis
              Veteran Member
              • Nov 2003
              • 2638
              • Tahoe City, CA, USA.
              • BT3100

              #7
              Your attic is probably holding a lot of heat and costing you money, too. Make sure it's properly ventilated. IMHO, heat radiating into the house from a superheated attic is more problematic than the outside temperature, though probably not as big a factor as air leaks.

              Comment

              • dbhost
                Slow and steady
                • Apr 2008
                • 9523
                • League City, Texas
                • Ryobi BT3100

                #8
                Soffit vents, and 2 large turbines. But yes the attic gets nasty hot. This fall I will be completing the insulation job, and installing the radiant barrier foil I picked up last spring. I REALLY need help with that job though, kind of hard to manhandle the sheets of foil and staple them up while keeping it all straight...

                Actually the house is a LOT more comfortable than it was before I started the insulation project...

                I am not sure but I suspect I may benefit from adding gable vents. I will be redoing the siding shortly anyway.
                I am just concerned they may provide a means of entry for pests...
                Please like and subscribe to my YouTube channel. Please check out and subscribe to my Workshop Blog.

                Comment

                • pelligrini
                  Veteran Member
                  • Apr 2007
                  • 4217
                  • Fort Worth, TX
                  • Craftsman 21829

                  #9
                  Originally posted by dbhost
                  I REALLY need help with that job though, kind of hard to manhandle the sheets of foil and staple them up while keeping it all straight...
                  Try some springboards. I think there's another term for them. They can be a thin rip of wood with a flat top attached to go against the foil, wedge the bottom against a rafter or make a flat base that will span them. Probably would need a couple different sizes to deal with the roof slope.
                  Last edited by pelligrini; 07-20-2011, 10:10 AM.
                  Erik

                  Comment

                  • dbhost
                    Slow and steady
                    • Apr 2008
                    • 9523
                    • League City, Texas
                    • Ryobi BT3100

                    #10
                    Originally posted by pelligrini
                    Try some springboards. I think there's another term for them. They can be a thin rip of wood with a flat top attached to go against the foil, wedge the bottom against a rafter or make a flat base that will span them. Probably would need a couple different sizes to deal with the roof slope.
                    I know this makes sense somewhere...
                    Please like and subscribe to my YouTube channel. Please check out and subscribe to my Workshop Blog.

                    Comment

                    • pelligrini
                      Veteran Member
                      • Apr 2007
                      • 4217
                      • Fort Worth, TX
                      • Craftsman 21829

                      #11
                      They's work like those helpers for doing moulding, drywall etc. Instead of a person holding the foil the vertical springboard would be. A springboard would keep you from having to constantly adust a telescoping tube or something.
                      Erik

                      Comment

                      • dbhost
                        Slow and steady
                        • Apr 2008
                        • 9523
                        • League City, Texas
                        • Ryobi BT3100

                        #12
                        Ah, now I get it... Worth a try...
                        Please like and subscribe to my YouTube channel. Please check out and subscribe to my Workshop Blog.

                        Comment

                        • jking
                          Senior Member
                          • May 2003
                          • 972
                          • Des Moines, IA.
                          • BT3100

                          #13
                          Originally posted by dbhost
                          I am not sure but I suspect I may benefit from adding gable vents. I will be redoing the siding shortly anyway.
                          I am just concerned they may provide a means of entry for pests...
                          Fasten some wire screen material under the vent to keep the unwanted guests out.

                          Comment

                          Working...