Anyone need CR 2032 (Wixey) batteries

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • jussi
    Veteran Member
    • Jan 2007
    • 2162

    #1

    Anyone need CR 2032 (Wixey) batteries

    I bought a bunch of these at a monthly computer show I go to. Much more than I'll ever need. These are ones that fit the Wixey products and probably a few other machines. PM me if you guys want any. I'm just asking shipping.

    I have 10.

    Anyone have any suggestions on how to pack these to make sure they don't contact each other without making the package too bulky.
    Last edited by jussi; 11-08-2009, 04:20 PM.
    I reject your reality and substitute my own.
  • LCHIEN
    Super Moderator
    • Dec 2002
    • 21992
    • Katy, TX, USA.
    • BT3000 vintage 1999

    #2
    yeah, i could use some. One way to package them is to masking tape them to a piece of cardboard. All facing the same way. Tape them in rows and columns with horz and vert pieces of tape. Another is to use three sheets of corrugated cardboard, in a sandwich, cut round holes in the center one and use rubber cement to make the sandwich.

    Both ways should fit in a normal or padded envelope and permit mailing as first class envelopes without excess weight.
    Loring in Katy, TX USA
    If your only tool is a hammer, you tend to treat all problems as if they were nails.
    BT3 FAQ - https://www.sawdustzone.org/forum/di...sked-questions

    Comment

    • jussi
      Veteran Member
      • Jan 2007
      • 2162

      #3
      PM me how many you want and the address and I'll get them out tomorrow.
      I reject your reality and substitute my own.

      Comment

      • LCHIEN
        Super Moderator
        • Dec 2002
        • 21992
        • Katy, TX, USA.
        • BT3000 vintage 1999

        #4
        you really want some indestructable packaging take a 1/4" piece of masonite and use a forstner to drill holes part way through deep enough to cover the batteries. The point could just protrude thru the other side that's OK. Then put the batteries in each hole and cover with a strip of masking tape.
        Loring in Katy, TX USA
        If your only tool is a hammer, you tend to treat all problems as if they were nails.
        BT3 FAQ - https://www.sawdustzone.org/forum/di...sked-questions

        Comment

        Working...