Pocket knife and scissors? Advice, please

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • brooks
    Established Member
    • May 2006
    • 106

    #1

    Pocket knife and scissors? Advice, please

    I just got the Gerber Eclipse based on a picture (and no feedback from users) and I'm not 100% satisfied with it. I need a pocket blade and some tiny scissors almost daily. It mustn't be as bulky as a Swiss Army knife. The main failing I'm seeing in small tools is the scissors component. So far, the only really usable scissors are on the Swiss Victorinox/Wenger knives.

    The Fiskars scissors are tough enough, they will at least cut the blister pack it came in (the little knife really won't). It feels gritty overall, the tool doesn't feel like quality goods. It feels crude and sharp everywhere, as if it needs more finishing, polishing. The way the handles fold up is a bit tricky. There's no stop, you have to fiddle with it, make sure the scissors blades are exactly in the same plane as the handles before you start rotating the handles upward for pocket storage. There's no loop to hang the tool from anywhere.

    I only need a small scissors (enough to cut string and maybe a few paper labels) and a small blade to open cardboard packages. Is there a SMALL tool that does this in a refined way? I don't want a big Leatherman tool. I saw a small version but it had no scissors.
  • Ken Massingale
    Veteran Member
    • Dec 2002
    • 3862
    • Liberty, SC, USA.
    • Ridgid TS3650

    #2
    This one?

    http://www.amazon.com/gp/product/B00...ance&n=3375251

    Comment

    • Bruce Cohen
      Veteran Member
      • May 2003
      • 2698
      • Nanuet, NY, USA.
      • BT3100

      #3
      Try this too

      http://www.amazon.com/gp/product/B00...nce&n=3375251\

      Bruce
      "Western civilization didn't make all men equal,
      Samuel Colt did"

      Comment

      • mater
        Veteran Member
        • Jan 2004
        • 4197
        • SC, USA.

        #4
        I have been carrying the Leatherman Micra for years and it sounds like what you need. It has a knife blade and scissors.
        Ken aka "mater"

        " People may doubt what you say but they will never doubt what you do "

        Ken's Den

        Comment

        • Stan
          Senior Member
          • Feb 2004
          • 966
          • Kalispell, MT, USA.
          • BT3100, Delta 36-717

          #5
          I've also been carrying a Leatherman Micra for around 8 years now. Only on my second one so they do last for quite a while (although the one I carry now needs sharpening).

          Small, lightweight and great quality.
          From the NW corner of Montana.
          http://www.elksigndesigns.com

          Comment

          • LCHIEN
            Super Moderator
            • Dec 2002
            • 22053
            • Katy, TX, USA.
            • BT3000 vintage 1999

            #6
            I carry this one most of the time,
            has two blades, and scissors plus straight and phillips screwdrivers and other useful stuff.
            It's on the verge of bulky, but I find it handy.
            http://www.swissarmy.com/cgi-bin/Msm...d=super+tinker+


            I don't know what you mean by too bulky but there's a number of swiss army knife either wegner or victorinox that are small and have a small blade and small scissors. like this one can hardly be called bulky:

            http://www.swissarmy.com/MultiTools/...&product=53005&
            Last edited by LCHIEN; 06-10-2006, 11:04 PM.
            Loring in Katy, TX USA
            If your only tool is a hammer, you tend to treat all problems as if they were nails.
            BT3 FAQ - https://www.sawdustzone.org/forum/di...sked-questions

            Comment

            • cwsmith
              Veteran Member
              • Dec 2005
              • 2810
              • NY Southern Tier, USA.
              • BT3100-1

              #7
              I have the last one, that LCHIEN posted. It's only about 2 inches long when folded. I've had it about eight years I think and it's perfect for what you describe. I don't think the file is worth much other than maybe your nails because it is set into the middle of the blade and doesn't run out to the edge. My blade has been touched up a couple times with fine emory paper and it holds it's edge fairly well; good for opening up the occasional box, cutting off electrical tape, etc. Tooth pick and tweezers are handy, although the latter is tough to hold with big fingers. I can't tell you how many times I've used those little scissors though. They are definitely handy and do a good job cutting thread, those burger coupons, or whatever.

              Problem I have with some of those multi-tool things is that the heavy springs on some models make it very difficult to pry out some of the blades and tools... you almost need another tool to do that safely.

              CWS
              Last edited by cwsmith; 06-10-2006, 10:28 PM.
              Think it Through Before You Do!

              Comment

              • crokett
                The Full Monte
                • Jan 2003
                • 10627
                • Mebane, NC, USA.
                • Ryobi BT3000

                #8
                I have a Leatherman micra I keep in my desk at work. I really don't use it for much - I can cut paper or most anything else with my Swiss Army knife. The knife is much more useful - has a bigger and better philips and flat screwdrivers, tweezers and a can/bottle opener.
                David

                The chief cause of failure in this life is giving up what you want most for what you want at the moment.

                Comment

                • messmaker
                  Veteran Member
                  • May 2004
                  • 1495
                  • RICHMOND, KY, USA.
                  • Ridgid 2424

                  #9
                  I think the Leatherman Micra will do what you need. The scissors are not large but they are well built and cut very well. I took a swiss Army knife off my keychain to replace it with the Leatherman.
                  spellling champion Lexington region 1982

                  Comment

                  • brooks
                    Established Member
                    • May 2006
                    • 106

                    #10
                    Thanks for the advice. Especially on the Leatherman, I have never considered one before. The local stores carried the version with the pliers, I didn't know they had one with scissors.

                    I'm going to try both. I have ordered a micro version of a Victorinox knife and a Leatherman Squirt. I recall having a small Swiss army knife years ago but felt the scissors were almost too small. Still, I did like it and won't die from having two gadgets that do the same thing. I'd forgotten about the mini version. Thanks for the reminder.
                    Last edited by brooks; 06-11-2006, 10:10 PM.

                    Comment

                    • brooks
                      Established Member
                      • May 2006
                      • 106

                      #11
                      I got the Leatherman Squirt and it's perfect for what I had in mind. The Victorinox probably will be too but the scissors on the Squirt are bigger, heavier and easier to use.

                      Thanks for the tip. I really would never have looked at Leatherman. I thought they were pliers-oriented.

                      Comment

                      Working...