Delta 16" 3 Wheel Bandsaw 28-560

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • doctordremel
    Forum Newbie
    • Apr 2004
    • 81
    • Greensboro, NC.

    #1

    Delta 16" 3 Wheel Bandsaw 28-560

    I was at a local charity flea market and spotted this GIANT 3 wheel bandsaw [8)]and since I need a BS and it was only $98 with no blade, I bought it. It powered up and was nice and quiet. I removed the wheels and lubed and cleaned it.

    [B)]Then I went on the web and discovered WHY it had no blade, it seems the blade life is very short, measured in single digit hours.

    Does anyone have one of these and can you recommned a few blades, 82" very thin .014"-.022" I found a matching JET blade on Ebay and its on its way, but I want to get a stouter one to attempt (I expect the worse) resawing.

    Sure LOOKS cool though!
    \"Art is skill, that is the first meaning of the word.\"
    Eric Gill
  • LCHIEN
    Super Moderator
    • Dec 2002
    • 22099
    • Katy, TX, USA.
    • BT3000 vintage 1999

    #2
    Just wildly guessing here.
    I imagine that to get 16" of clearance the three wheels is necessary. Then, with only an 82" blade, the wheels are probably only, what, 6" dia?

    If that's the case, then tha's why the blade life is short - you are wrapping them around a small radius and working them hard.

    Do they break at the weld?
    If so, you might be able to weld your own and repair them...
    You'd have to trim off a small amount and re-weld. But you could do it several times before the blade became too short to use.
    I don't know what a welding arrangement costs - might just be a fixture and a propane torch...

    Look into it?

    got a picture, curious to see this beast?

    OK, here's a manual with picture on the cover:
    http://media.ptg-online.com/media/dm...2010-12-95.pdf
    Loring in Katy, TX USA
    If your only tool is a hammer, you tend to treat all problems as if they were nails.
    BT3 FAQ - https://www.sawdustzone.org/forum/di...sked-questions

    Comment

    • doctordremel
      Forum Newbie
      • Apr 2004
      • 81
      • Greensboro, NC.

      #3
      The Delta site says the blades need to be electronically welded to be reliable, more trouble than I want, so I will just buy more blades. It is a beast, it came without the stand so I am cobbling up a base and mounting it to a metal cabinet, will post soon.
      \"Art is skill, that is the first meaning of the word.\"
      Eric Gill

      Comment

      Working...