Anyone remember the 70's

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • Doghouse
    Forum Newbie
    • Feb 2003
    • 79
    • VA.

    #1

    Anyone remember the 70's



    I skipped back to the 70's and grabbed this...

    It is 8X8 bubblegum dymondwood. My wife loves it, I am not sure yet.
  • gerti
    Veteran Member
    • Dec 2003
    • 2233
    • Minnetonka, MN, USA.
    • BT3100 "Frankensaw"

    #2
    Certainly different! Did you turn it from a square, or cut it later? If turned from a square, wouldn't the gouge easily catch?

    Gerd

    Comment

    • Jim Boyd
      Veteran Member
      • Dec 2002
      • 1766
      • Montgomery, Texas, USA.
      • Delta Unisaw

      #3
      That is EXACTLY how portions of the late 70's are in my memories! How did you know? ESP?
      Jim in Texas and Sicko Ryobi Cult Member ©

      Comment

      • GeekMom
        Senior Member
        • Dec 2004
        • 752
        • Bonney Lake, WA.
        • Shopsmith Mark V

        #4
        Now THAT'S an eye-grabber!
        Karen
        <><

        Comment

        • Pappy
          The Full Monte
          • Dec 2002
          • 10490
          • San Marcos, TX, USA.
          • BT3000 (x2)

          #5
          70's??? There were 70's??? What happened????
          Don, aka Pappy,

          Wise men talk because they have something to say,
          Fools because they have to say something.
          Plato

          Comment

          • BobSch
            Veteran Member
            • Aug 2004
            • 4385
            • Minneapolis, MN, USA.
            • BT3100

            #6
            Far out, man!
            Bob

            Bad decisions make good stories.

            Comment

            • maxparot
              Veteran Member
              • Jan 2004
              • 1421
              • Mesa, Arizona, USA.
              • BT3100 w/ wide table kit

              #7
              Groovy man! and I didn't even need any weed or acid.
              Opinions are like gas;
              I don't mind hearing it, but keep it to yourself if it stinks.

              Comment

              • Doghouse
                Forum Newbie
                • Feb 2003
                • 79
                • VA.

                #8
                It was turned square, it is a little grabby if you are not careful and take real light cuts. You just kick up the speed and then the time between wings reduces so there is less of a chance of the gouge slipping behind a wing. But if it does... It is the defination of a spectacular catch! It is 8X8X2 so it was a heavy blank. I do have to say that the worst part was cutting the diamond wood. I ended up switching to carbide for the roughing work. It was just taking the edges off the tools too quickly.

                Comment

                • BrazosJake
                  Veteran Member
                  • Nov 2003
                  • 1148
                  • Benbrook, TX.
                  • Emerson-built Craftsman

                  #9
                  quote:Originally posted by maxparot

                  Groovy man! and I didn't even need any weed or acid.
                  You're in the 60s, dude. 70s was coke, white leisure suits.

                  LOML and I watched "The Miracle" the other night, the one about the 1980 U.S. Hockey team. Man, plaid suits & BIG ties, what were people thinking.

                  Comment

                  • gerti
                    Veteran Member
                    • Dec 2003
                    • 2233
                    • Minnetonka, MN, USA.
                    • BT3100 "Frankensaw"

                    #10
                    quote:Originally posted by Doghouse

                    It was turned square, it is a little grabby if you are not careful and take real light cuts. You just kick up the speed and then the time between wings reduces so there is less of a chance of the gouge slipping behind a wing. But if it does... It is the defination of a spectacular catch! It is 8X8X2 so it was a heavy blank. I do have to say that the worst part was cutting the diamond wood. I ended up switching to carbide for the roughing work. It was just taking the edges off the tools too quickly.
                    Thanks for the details! I only did a pen from diamond wood once, and did notice that it likes to dull the tools. Probably the glue, or maybe the dye particles? Pretty dusty too. But a cool effect!

                    Gerd

                    Comment

                    Working...