Well I am at it again! I need to turn a piece that will be rather thin but will be about 15” across. It seems as though the new motor was considerably longer than the old one and restricted the size I could turn outboard.
So on my quest to better my lathe I built and welded a new motor mounting bracket and reversed the motor. As you can see here I have also added a link belt and real pulleys. I built the bracket very solid and have no real vibration.
http://www.theturnersshop.com/temp/0...4/DSCF0043.jpg
Now I can rotate the head and do what I need to do.
http://www.theturnersshop.com/temp/0...4/DSCF0044.jpg
I still have to build belt covers and covers for the miscellaneous holes left from removing different things from the lathe.
http://www.theturnersshop.com/temp/0...4/DSCF0045.jpg
The next modification is a hand wheel for the external spindle shaft. I am really starting to get happy with this lathe but I think I messed up my warranty!
So on my quest to better my lathe I built and welded a new motor mounting bracket and reversed the motor. As you can see here I have also added a link belt and real pulleys. I built the bracket very solid and have no real vibration.
http://www.theturnersshop.com/temp/0...4/DSCF0043.jpg
Now I can rotate the head and do what I need to do.
http://www.theturnersshop.com/temp/0...4/DSCF0044.jpg
I still have to build belt covers and covers for the miscellaneous holes left from removing different things from the lathe.
http://www.theturnersshop.com/temp/0...4/DSCF0045.jpg
The next modification is a hand wheel for the external spindle shaft. I am really starting to get happy with this lathe but I think I messed up my warranty!
Comment