just broke my foot

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • tribalwind
    Senior Member
    • Feb 2004
    • 847
    • long island, ny.

    #1

    just broke my foot

    and sent what would've been another nice african-mahogany bowl kareeming into my shopp wall,

    it actually happened twice,anfter shaping/finishing the outside/foot then holding the foot with an expansion grip on the chuck.
    i got a catch while hollowing out the inside. i was able to use CA glue on the foot that time and wasnt too bad( i did have to resand and polish the whole outside cause ca dripped down the sides)

    but the next catch completely smashed the rim and ripped off half the foot..t didnt seem like a really big catch but i guess anything all all is enough when turning on just a foot-hold. you can see the catches in the top left.

    am i making my foot too small?any tips on chucking for doing the inside?
    do we always make the foot or outside first then reverse?this wood is ver straight grain as u can see,maybe its just inherently difficult to chuck with this orientation?

    was thinking since i didnt turn away the center where the screw goes i might be able to turn down past the broken rim then turn a new foot and salvage a smaller shallow bowl or dish from this.worth a shot i guess...




    namaste, matthew http://www.tribalwind.com
  • Chuck C
    Established Member
    • Dec 2002
    • 430
    • USA.

    #2
    Sorry to see your damaged bowl. Glad to see that it wasn't your real foot.
    Chuck C

    If the skipper heard you call that deck a floor he would throw you through that little round window

    Comment

    • smc331
      Veteran Member
      • Apr 2003
      • 1016
      • Charlotte, NC, USA.
      • BT3100

      #3
      Glad it was wood and not bone! Had me worried for a second! Wish I had an answer for you - I still don't have my lathe set up...[B)]
      Scott

      ------------------------------------------------------------------------------------------------
      You can't be a real country unless you have a beer and an airline - it helps if you have some kind of a football team, or some nuclear weapons, but at the very least you need a beer. -- Frank Zappa

      http://macbournes.com

      Comment

      • kwgeorge
        Veteran Member
        • Jan 2004
        • 1419
        • Alvin, TX, USA.

        #4
        We have all been there Matthew, it happends some times. Did I ever tell you about my shop funnels?

        Comment

        • tribalwind
          Senior Member
          • Feb 2004
          • 847
          • long island, ny.

          #5
          eh thanks folks,' hopefully ill learn something from it, obviously my technique and tool selection needs improving for inside work, i learned that at least!

          oh and by the way, big thanks go out to MORT, i tried that baking-soda/water trick he mentioned in other post and was amazed how well it works, you can see this bowl came out darker than the other posting
          namaste, matthew http://www.tribalwind.com

          Comment

          • gerti
            Veteran Member
            • Dec 2003
            • 2233
            • Minnetonka, MN, USA.
            • BT3100 "Frankensaw"

            #6
            "baking-soda/water trick"? Must have missed that one!

            Keep on trying! As I just mentioned in another thread: My last piece (first attempt at a bowl) is probably still in orbit! But I am a sport-turner: Catch and release!

            Gerd

            Comment

            Working...