HF Narrow crown staples

[Aimlesssoul]

Anybody use the HF 1/4" crown staples? Do they work well in most staplers, I have a Hitachi. I have read that their nailers work well with branded nails, I wonder if their staples feed well?

Thanks

[sweensdv]

Not the ¼" variety but in the past I've have troubles with the HF ½" staples. I have had good luck with the house brand ¼" crown staples at Menards.

[JimD]

I use the 1/4 inch staples in a HF stapler to put backs on cabinets and to build plantation shutters. They work well. The stapler will not shoot the 1 1/2 inch staples unless the line pressure is over 100 psi but the 3/4 staples shoot fine (and I think it is the stapler, not the staples with the 1 1/2 inch). I also have good experience with the 1/2 inch upholstrey staples but that is in another HF stapler. I've used some HF pin nails in my bostich pin nailer and they work fine.

Jim

[cabinetman]

HF fasteners work well in their guns. I've also used them in Senco and Duo-Fast, with no problems.

.