Got a new Respirator

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • jussi
    Veteran Member
    • Jan 2007
    • 2162

    #1

    Got a new Respirator

    I was looking for a new respirator as my old one was wearing out. The straps were becoming frayed and the elasticity was almost non existent which made getting a snug fit near impossible. I also just started turning and wanted to get something that would protect my entire face. I can use a face shield but then I don't get as much dust protection. If I use my respirator I don't have as much face protection.
    So I compromised ended up getting a full face respirator. A guy on CL was selling them new and threw in an extra set of filters. It's the 3M 6800 model and comes with the popular 3M PINK filters. It works really well and gives a very snug but comfortable fit. It doesn't give as much protection as a face shield however. The exhaust is positioned so it doesn't cause any fogging (at least none I've experienced). The straps are a rubber type instead of the cloth (elastic) type my AO Safety had so I don't think this will wear out or loose it's elasticity. Having both eye and breathing protection is convenient because I usually misplace my goggles. I bought it primarily for turning but I think it will be my primary respirator.
    Only downside so far is the weird looks people give you when they pass by. I work with my garage door open which faces the street. Well that and it is a bit heavier than a regular respirator. I'll see if the slight extra weight bothers me. If it does I may get a 3M 7503.

    http://www.allergybegone.com/3mfulfa...=6&zmap=3m6800
    Attached Files
    Last edited by jussi; 09-20-2010, 07:41 PM.
    I reject your reality and substitute my own.
  • chopnhack
    Veteran Member
    • Oct 2006
    • 3779
    • Florida
    • Ryobi BT3100

    #2
    LOL, tell them to stop watching breaking bad!
    I think in straight lines, but dream in curves

    Comment

    • thestinker
      Senior Member
      • Oct 2005
      • 613
      • Fort Worth, TX, USA.

      #3
      We use those at work, Ive had mine about 10 years and have used it everyday. The only down sides are it can be uncomfortable after several hours and it gets hot after a while. If I only need to wear for a few minutes then its great. I do like these better :
      http://www.grainger.com/Grainger/wwg...N=0&sst=subset

      But they are expensive and are heavy, but are much cooler and more comfortable.
      Awww forget trying to fix it!!!! Lets just drink beer

      Comment

      • dkerfoot
        Veteran Member
        • Mar 2004
        • 1094
        • Holland, Michigan
        • Craftsman 21829

        #4
        I have basically the same respirator - I bought it at an auction along with a dozen new carbon filters very cheap (about $25 if my memory serves correctly!). At first I was afraid it would be as uncomfortable as the old Navy Mk5 Respirator that I had hated so much, but it is much lighter and the rubber is softer and more comfortable.

        I have terrible allergies, including a sensitivity to wood dust, so I wear it whenever I am in the shop. I think it offers terrific protection while turning. I have never had a problem with fogging.
        Doug Kerfoot
        "Sacrificial fence? Aren't they all?"

        Smaller, Smarter Hardware Keyloggers
        "BT310" coupon code = 10% for forum members
        KeyLlama.com

        Comment

        Working...