Circuit breaker for tools?

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • chopnhack
    Veteran Member
    • Oct 2006
    • 3779
    • Florida
    • Ryobi BT3100

    #1

    Circuit breaker for tools?

    Has anyone fused or added a circuit breaker to any of their tools? I ask because the nice new motor I have for the jointer is not fused or protected to my knowledge. I don't want to lose the magic smoke on this one yet Anyway, I have seen small circuit breakers, 10a for instance (like this) and it seemed like cheap insurance. Any pointers on the time delay? Should I be looking for something with a high time delay, 10sec or more or less? The motor is rated at 120v 9.6A. Any help would be appreciated. Thanks!
    I think in straight lines, but dream in curves
  • Daryl
    Senior Member
    • May 2004
    • 831
    • .

    #2
    How about using a fused switch? This one isn't too expensive. http://www.hardwareandtools.com/Squa...h-6589725.html

    There are also ones with a breaker built in, you change the heaters for the load you are using.
    Sometimes the old man passed out and left the am radio on so I got to hear the oldie songs and current event kind of things

    Comment

    Working...