Klingspor discs etc

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • poolhound
    Veteran Member
    • Mar 2006
    • 3196
    • Phoenix, AZ
    • BT3100

    #1

    Klingspor discs etc

    Hi Guys - long time

    I had been out of comission for a while with back issues and then have simply been very busy with work. I am now fully "back in the saddle" and working on a rather cool restoration project - more on that later.

    Anyway, I find myself needing to replensih some of my sanding supplies and I always tend to buy in bulk as I hate spending disproportionatly large $$s for 10 discs etc. I know my local industrial Klingspor rep and I have in the past been able to get good discounts from him, that often (but not on everything) will beat their online woodworking store. Their 5" discs I have got in the past for ~$20/box of 100. It take a while to go through 100 discs (at least for me) so wondered if anybody locally (PHX) wanted to go in on an order of stuff, also he has a minimum $ value of order so this would help.

    Let me know.
    Jon

    Phoenix AZ - It's a dry heat
    ________________________________

    We all make mistakes and I should know I've made enough of them
    techzibits.com
  • SARGE..g-47

    #2
    If I hadn't just "re-loaded" about 3 weeks ago with 50 pks. I would but..... I did what I did when I needed too.

    Good luck...

    Comment

    • poolhound
      Veteran Member
      • Mar 2006
      • 3196
      • Phoenix, AZ
      • BT3100

      #3
      It seems like my various grits are out of sync.

      I have loads of 80, 120, 180, 220 & 320 but for some reason I am down to my last few discs in 100, 150 I guess I must use those more often but never really noticed before.

      I think 100 is my go to starting grit unless the surface is really rough.
      Jon

      Phoenix AZ - It's a dry heat
      ________________________________

      We all make mistakes and I should know I've made enough of them
      techzibits.com

      Comment

      Working...