First, about my mention on another thread about using my router for jointing.
This is still working great but I had to redo it. Initially I put the UHMW tape just to the edge of the lower fence section. After a while the wood started to catch at the end and interfered with the smooth pass of the wood. Trimming it just exposed the adhesive and that made it worse. I ended up replacing the tape and went part way around the end of the lower section.
Second, the Thien separator still works great with the addition of the sticks inside to keep it from collapsing. However, it makes it harder to empty out the chips so I just remove them first. I may still make something for the outside. Maybe later.
This is still working great but I had to redo it. Initially I put the UHMW tape just to the edge of the lower fence section. After a while the wood started to catch at the end and interfered with the smooth pass of the wood. Trimming it just exposed the adhesive and that made it worse. I ended up replacing the tape and went part way around the end of the lower section.
Second, the Thien separator still works great with the addition of the sticks inside to keep it from collapsing. However, it makes it harder to empty out the chips so I just remove them first. I may still make something for the outside. Maybe later.
Attached Files