Belt sander cleaning

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • tommyt654
    Veteran Member
    • Nov 2008
    • 2334

    #1

    Belt sander cleaning

    Has anyone ever used an old tennis shoe to clean up the belts on a stationary belt sander?
  • cabinetman
    Gone but not Forgotten RIP
    • Jun 2006
    • 15216
    • So. Florida
    • Delta

    #2
    Originally posted by tommyt654
    Has anyone ever used an old tennis shoe to clean up the belts on a stationary belt sander?

    Actually I wear my old tennis shoes. Does it work? If it does, do I have to take them off to run them on the belt?

    I've been using those cleaning sticks.
    .

    Comment

    • sweensdv
      Veteran Member
      • Dec 2002
      • 2873
      • WI
      • Baileigh TS-1040P-50

      #3
      Never done the tennis shoe route but I've read that it works.

      I've also seen where you can use a tube of caulk that has solidified up. Just tear off the outside cardboard and you're good to go.
      _________________________
      "Have a Great Day, unless you've made other plans"

      Comment

      • tommyt654
        Veteran Member
        • Nov 2008
        • 2334

        #4
        Grabbed an old pair of Asics out of the closet and lo and behold it works pretty darn good, cleaned up the pine I had been sanding right off the belt in about 45 sec. COOL.

        Comment

        • scmhogg
          Veteran Member
          • Jan 2003
          • 1839
          • Simi Valley, CA, USA.
          • BT3000

          #5
          My belt sander is mounted nearly four feet of the ground. How do you get your foot up that high??

          Steve
          I would never die for my beliefs because I might be wrong. Bertrand Russell

          Comment

          • Tom Slick
            Veteran Member
            • May 2005
            • 2913
            • Paso Robles, Calif, USA.
            • sears BT3 clone

            #6
            Originally posted by scmhogg
            My belt sander is mounted nearly four feet of the ground. How do you get your foot up that high??

            Steve
            Hand Stands!
            Opportunity is missed by most people because it is dressed in overalls and looks like work. - Thomas Edison

            Comment

            • tfischer
              Veteran Member
              • Jul 2003
              • 2349
              • Plymouth (Minneapolis), MN, USA.
              • BT3100

              #7
              The cleaning sticks work awesome. I clean the belt as part of putting the tool to bed at the end of every session...

              The sticks are cheap and last forever. I wouldn't trust a shoe, can't imagine it works as well and could wreck the belt, depending on what the shoe was made of, if there was a hidden rock embedded, etc...

              Comment

              • Tom Miller
                Veteran Member
                • Mar 2003
                • 2507
                • Twin Cities, MN
                • BT3000 - Cuttin' it old school

                #8
                I've heard the tennis shoe trick, too, but that probably started back in the days when they were made of rubber. Who knows what tennis shoe soles are made out of now.

                I'd be wary of the dried caulk trick, too, as silicone or similar substances could really bite you.

                I bought a cleaning stick -- at the current usage rate, I may never need another.

                Regards,
                Tom

                Comment

                • Santa Clarita Len
                  Established Member
                  • Feb 2006
                  • 166
                  • Santa Clarita Calif.
                  • Bt3000 and Dewalt radial arm saw

                  #9
                  Originally posted by scmhogg
                  My belt sander is mounted nearly four feet of the ground. How do you get your foot up that high??

                  Steve
                  Someone steal your ladder?

                  Comment

                  • sweensdv
                    Veteran Member
                    • Dec 2002
                    • 2873
                    • WI
                    • Baileigh TS-1040P-50

                    #10
                    Originally posted by Tom Miller
                    I'd be wary of the dried caulk trick, too, as silicone or similar substances could really bite you.

                    Tom
                    Excellent point Tom, I'm glad I never tried it.
                    _________________________
                    "Have a Great Day, unless you've made other plans"

                    Comment

                    • Uncle Cracker
                      The Full Monte
                      • May 2007
                      • 7091
                      • Sunshine State
                      • BT3000

                      #11
                      One of those gum rubber cleaning sticks will last for years (I've got 10+ on the one I'm using...), so finding an alternative has not been a priority of mine...

                      Comment

                      Working...