Only in Atl.

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • tommyt654
    Veteran Member
    • Nov 2008
    • 2334

    #1

    Only in Atl.

    One of the great things about living here are all the deals available. As some of you know I jump at the chance to save or make a few bucks due to my current disability. So checking Craigslist this mornring I see this add. Craftsman table saw and bandsaw $30. So I called and she was right around the corner. So this is what I got for my $30. I think a new coat of gray paint and some elbow grease on the tables will work wonders. They all work as intended with very little noise. Maybe the next generation I sell them too will appreciate old iron like this. Also I think she must have thought the jointer was part of the bandsaw, Go figure.
    Last edited by tommyt654; 03-24-2013, 11:57 AM.
  • pelligrini
    Veteran Member
    • Apr 2007
    • 4217
    • Fort Worth, TX
    • Craftsman 21829

    #2
    That's a pretty darn good haul for $30.
    Erik

    Comment

    • tommyt654
      Veteran Member
      • Nov 2008
      • 2334

      #3
      Yup and their in pretty darn good shape. I,ll enjoy restoring these and posting over on OWWM when I get finished. Just gotta get a few new stands for them and see If I can find a miter for the table saw and another table extension. I can get new blades for the jointer from Freud and the bandsaw will get another stand and motor as well. But all the extras and the original manuals and stuff were a bonus
      Last edited by tommyt654; 06-17-2009, 05:44 PM.

      Comment

      • tfischer
        Veteran Member
        • Jul 2003
        • 2349
        • Plymouth (Minneapolis), MN, USA.
        • BT3100

        #4
        Wow what a haul! Is that jointer driven off of the same motor as the BS, or... ?

        Comment

        • tommyt654
          Veteran Member
          • Nov 2008
          • 2334

          #5
          Yes, but its too close to the bandsaw to use the whole bed. That,s why I,ll be buying another motor for the bandsaw. I ,ve got 2 spare delta stands for the jointer and bandsaw and a BT3100 stand for the Table saw. There have been a ton of deals on the Atl craigslist lately, too many for me(limited income). Last week there was a Dayton 14 in. bandsaw for $50 that was sweet, but I,ve got a 14.
          Last edited by tommyt654; 06-17-2009, 06:46 PM.

          Comment

          • tseavoy
            Established Member
            • May 2009
            • 200
            • Nordland, Marrowstone Island, Washington
            • Older 9 inch Rockwell Delta (1960?)

            #6
            Gawd, that must be the buy of the century. Envy is just too weak a word to describe my feeling.

            Tom on Marrowstone


            "Wheat (n.) A grain from which a tolerable whiskey can be made."
            ----Ambrose Bierce

            Comment

            • pelligrini
              Veteran Member
              • Apr 2007
              • 4217
              • Fort Worth, TX
              • Craftsman 21829

              #7
              I wonder how many sets of those molding cutters & dado stacks they sold. I have both, but they're a little bit newer than yours. They're in clear plastic boxes with a cardboard sleeve. I probably have a few of those blades too. Is one of those smaller ones a craftsman tennon blade?
              Erik

              Comment

              • OpaDC
                Established Member
                • Feb 2008
                • 393
                • Pensacola, FL
                • Ridgid TS3650

                #8
                Originally posted by tommyt654
                But all the extras and the original manuals and stuff were a bonus
                Worth more than $30 alone IMHO. Great haul!!
                _____________
                Opa

                second star to the right and straight on til morning

                Comment

                • tfischer
                  Veteran Member
                  • Jul 2003
                  • 2349
                  • Plymouth (Minneapolis), MN, USA.
                  • BT3100

                  #9
                  Originally posted by tommyt654
                  Yes, but its too close to the bandsaw to use the whole bed
                  Strange -- did it use some sort of idler pulley, or did one really have the BS spinning away the whole time they used the jointer? That just seems strange, if not dangerous...

                  Comment

                  • tommyt654
                    Veteran Member
                    • Nov 2008
                    • 2334

                    #10
                    They came with 1 belt. So you would take it off 1 machine and move it to the other, Takes less than a minute.

                    Comment

                    • SARGE..g-47

                      #11
                      Very nice buy, Tommy. What part of town are you in?

                      Comment

                      • tommyt654
                        Veteran Member
                        • Nov 2008
                        • 2334

                        #12
                        Marietta/East Cobb, How about you?

                        Comment

                        • SARGE..g-47

                          #13
                          I grew up in Gwinnett County when it was farm country Tommy. Much as Roswell and Alpharetta in the 50's. Things have changed and IMO.. not necessarily for all the better. I'm out in the county seat and my home-town of Lawrenceville now and have been since late 78'.

                          Comment

                          • tommyt654
                            Veteran Member
                            • Nov 2008
                            • 2334

                            #14
                            Yup, When I moved here in 75 I could hunt deer and fish within walking distance and ride my dirt bikes all day and never see a soul. Times have changed agreed not for the best. We are thinking about moving to Rome or Cartersville. Too much congestion and traffic for my taste here. Maybe thats just progress?

                            Comment

                            • Shep
                              Senior Member
                              • Nov 2008
                              • 710
                              • Columbus, OH
                              • Hitachi C10FL

                              #15
                              I hate my luck.
                              -Justin


                              shepardwoodworking.webs.com


                              ...you can thank me later.

                              Comment

                              Working...