A Good Hacksaw Blade

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • leehljp
    The Full Monte
    • Dec 2002
    • 8804
    • Tunica, MS
    • BT3000/3100

    #1

    A Good Hacksaw Blade

    I have not had the need for REAL work tools since Dad sold the farm back in the late '60s. But I always buy more tool (a heavier duty tool) than I need and have rarely been disappointed.

    But I usually buy the general grade hacksaw blades, never the cheapest but not the expensive ones either. I needed one last week and instead of the $1.00 - $2.00 blade, bought a blade for $5.00 (actually a pack of 4 for $20.00) that was rated HSS (real HSS). I can't believe how good that thing cuts as compared to the past general purpose blades that I used. I have cut stainless, that hard bed frame angle iron with this blade.

    "Best bang for the buck" and "good enough" general purpose blades certainly don't compare to having a GOOD hacksaw blade.
    Last edited by leehljp; 10-15-2008, 09:05 PM.
    Hank Lee

    Experience is what you get when you don't get what you wanted!
  • cgallery
    Veteran Member
    • Sep 2004
    • 4503
    • Milwaukee, WI
    • BT3K

    #2
    Are the blades made of HSS, or are they made of a material used to cut HSS?

    For example, would they cut a HSS drill or tool bit?

    Comment

    • leehljp
      The Full Monte
      • Dec 2002
      • 8804
      • Tunica, MS
      • BT3000/3100

      #3
      Originally posted by cgallery
      Are the blades made of HSS, or are they made of a material used to cut HSS?

      For example, would they cut a HSS drill or tool bit?
      I had to go get the blade pack and look. I thought it said "cut's HSS" but it doesn't. It is an HSS blade. I really like it and I think it is kinda high compared to US blades. I won't and can't complain about it.

      I did buy it from a specialty/industrial supply tool store.
      Hank Lee

      Experience is what you get when you don't get what you wanted!

      Comment

      • Rich P
        Established Member
        • Apr 2003
        • 390
        • Foresthill, CA, USA.
        • Powermatic 66 (1966 vintage)

        #4
        McMaster-Carr has several varieties (10 pack) for between $10 and $14. Since I've always been "hack saw challenged" I may just have to try these out!
        Don't ever ask a barber if you need a haircut.

        Comment

        • Whaler
          Veteran Member
          • Dec 2002
          • 3281
          • Sequim, WA, USA.
          • DW746

          #5
          Several years ago I bought a couple blades from the local Snap On man. I can't remember the price, much more than I had ever paid for a blade before though. They were HSS and fantastic blades.
          Dick

          http://www.picasaweb.google.com/rgpete2/

          Comment

          • cgallery
            Veteran Member
            • Sep 2004
            • 4503
            • Milwaukee, WI
            • BT3K

            #6
            Yeah, I had no idea they made HSS hacksaw blades. The ones I've purchased at Ace have not lasted.

            Comment

            • cabinetman
              Gone but not Forgotten RIP
              • Jun 2006
              • 15216
              • So. Florida
              • Delta

              #7
              I've had good results with Starrett blades.
              .

              Comment

              • shoottx
                Veteran Member
                • May 2008
                • 1240
                • Plano, Texas
                • BT3000

                #8
                Lennox Blades are also good!
                Often in error - Never in doubt

                Mike

                Comment

                • Tom Slick
                  Veteran Member
                  • May 2005
                  • 2913
                  • Paso Robles, Calif, USA.
                  • sears BT3 clone

                  #9
                  Bi-metal are usually good also.
                  Opportunity is missed by most people because it is dressed in overalls and looks like work. - Thomas Edison

                  Comment

                  Working...