Decisions: DeWalt 14.4V vs Ryobi Lithium

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • crokett
    The Full Monte
    • Jan 2003
    • 10627
    • Mebane, NC, USA.
    • Ryobi BT3000

    #1

    Decisions: DeWalt 14.4V vs Ryobi Lithium

    I have some gift cards to HD that will just about cover a new battery pack for my DeWalt 14.4V cordless. That said, it has not been working for at least 2 years and I haven't missed it yet. So I was thinking about either the Ryobi lithium driver or the Lithium 12V drill/driver. Right now I use my 18v Ryobi for both but a smaller lighter tool I think I would use more. So any comments? Is either of them worth purchasing?
    David

    The chief cause of failure in this life is giving up what you want most for what you want at the moment.
  • shoottx
    Veteran Member
    • May 2008
    • 1240
    • Plano, Texas
    • BT3000

    #2
    Look at the Bosch 12v Power driver. I use it more than anything else.
    Often in error - Never in doubt

    Mike

    Comment

    • maxparot
      Veteran Member
      • Jan 2004
      • 1421
      • Mesa, Arizona, USA.
      • BT3100 w/ wide table kit

      #3
      The Ryobi Lithium 18v pack are lighter than the nicad versions and supply significantly more power per charge without memory effect. I've made the switch over and find the Ryobi 18v tools that much better overall with the improvement.
      With the selection of tools available that use that pack it is a great option.
      Opinions are like gas;
      I don't mind hearing it, but keep it to yourself if it stinks.

      Comment

      • gettools
        Established Member
        • Sep 2006
        • 161
        • Fort Worth, Texas
        • BT3100

        #4
        I have the bosch PS20 & PS40 they are light & work great, can get them into smaller places too.
        Mark

        A chip on the sholder is a sign of wood further up !!!!

        Comment

        • poolhound
          Veteran Member
          • Mar 2006
          • 3196
          • Phoenix, AZ
          • BT3100

          #5
          If you already have a bunch of Ryobi 18V tools then making the switch to lithium batts is a good idea. I did it at the time when they did the crazy free offer. I like it that you can mix the old and new batteries. right now I have 2 old and one new lithium. As the others get old I will replace with lithium (unless HD has another deal).

          I also have the Bosch PS10 I Driver & PS20 Pocker driver. These are lithium and are great but are limited by comparison to a whole set of ryobi tools.
          Jon

          Phoenix AZ - It's a dry heat
          ________________________________

          We all make mistakes and I should know I've made enough of them
          techzibits.com

          Comment

          • crokett
            The Full Monte
            • Jan 2003
            • 10627
            • Mebane, NC, USA.
            • Ryobi BT3000

            #6
            Originally posted by maxparot
            The Ryobi Lithium 18v pack are lighter than the nicad versions and supply significantly more power per charge without memory effect. I've made the switch over and find the Ryobi 18v tools that much better overall with the improvement.
            With the selection of tools available that use that pack it is a great option.
            Hmm... Then maybe I should go ahead and get the 18v battery and charger. Thanks for the suggestion.
            David

            The chief cause of failure in this life is giving up what you want most for what you want at the moment.

            Comment

            • RAV2
              Established Member
              • Aug 2007
              • 233
              • Massachusetts
              • 21829

              #7
              Check out the Milwaukee 2601-22 18V Li-ion Compact Drill Kit.

              I have one and am amazed each day how well constructed of a drill it is:

              http://www.amazon.com/Milwaukee-2601.../dp/B000WER5SE

              At one time Lowes, HD, and Sears all carried it at the same price.

              Comment

              • annunaki
                Senior Member
                • Jan 2008
                • 610
                • White Springs, Florida
                • 21829, BT3100, 2-BT3000(15amp)

                #8
                See other thread using Ryobi 18V in Dewalt tools

                If you have any Dewalt 18V tools, you can use cheaper 1/3 priced Ryobi batteries if you make a simple adapter as explained elsewhere
                http://en.wikipedia.org/wiki/Fileodecahedron.gif

                Comment

                Working...