Table saw sled - part I

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • niki
    Senior Member
    • Nov 2006
    • 566
    • Poland
    • EB PK255

    #1

    Table saw sled - part I

    Good day

    I have only one sled that is dedicated to frame cutting at 45° and because it cuts so perfect, I don’t want to remove the triangle and use it also for normal crosscutting.

    Actually, I have two “half sleds” and sliding table so I don’t need a sled for crosscutting.

    I made this sled with small pieces ripping and crosscutting in mind.

    As you’ll see my TS is not “normal” and I have only one narrow miter slot so I had to make an “Outer runner” that runs on the table edge.
    The benefit of such a method is that first, the runner in the miter slot does not have to “fit snugly” and second, if the sled runners gets loose (play), I can always “re-tight” (or loosen, in case of humidity changes effect) or even change the “outer runner” to a new one without effecting the “Squareness” of the sled.

    Because the subject is very long…I mean, many pics (above 150), I divided it to 4 or 5 parts that I’ll post it in a few different threads.

    So, lets start….building the sled…

    Regards
    niki










































































































  • MilDoc

    #2
    Very nice tutorial and well thought out. Nice job again, Niki!

    Comment

    • gsmittle
      Veteran Member
      • Aug 2004
      • 2793
      • St. Louis, MO, USA.
      • BT 3100

      #3
      Very clever and inventive once again, Niki! Your solutions are so elegant and well-thought-out that if you're not a rocket scientist, you should be.

      g.
      Smit

      "Be excellent to each other."
      Bill & Ted

      Comment

      • niki
        Senior Member
        • Nov 2006
        • 566
        • Poland
        • EB PK255

        #4
        Thank you so much Paul and G

        G
        I cannot be a rocket scientist because most of them work with very sophisticated computers....

        you can imagine my computer skills if I still work with Windows 98......just go to your city museum and you'll see it on display

        But I'm very happy with my woodworking hobby

        Regards
        niki

        Comment

        • siliconbauhaus
          Senior Member
          • Dec 2006
          • 925
          • hagerstown, md

          #5
          I'm going to try this out on my bt as I only have a single mitre track extrusion.

          Another Niki classic.
          パトリック
          daiku woodworking
          ^deshi^
          neoshed

          Comment

          Working...