HF 4sp bandsaw

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • phoneman697
    Forum Newbie
    • Apr 2003
    • 38
    • Columbus, OH, USA.

    #1

    HF 4sp bandsaw

    For those of you who have removed the middle pulley on their 4sp bandsaw, when you went to flip the motor pulley so that the small pulley was next to the motor, did you have to use a pulley puller to remove it once the set screw was removed?
  • TB Roye
    Veteran Member
    • Jan 2004
    • 2969
    • Sacramento, CA, USA.
    • BT3100

    #2
    No the pulley comes of easily, just loosen the set screw. I think I used a large screwdriver as a pry bar to help. Didn't take much to move it. If you can use a link belt to replace the "V" belt you will find the vibration diminished greatly. About a 15 min. job.

    Tom

    Comment

    Working...