PALS -- Inline Industries

[ssmith1627]

Guys, has anyone here ordered these table saw "PALS" lately ? I placed an order on 12/20 and the things still haven't been shipped. They're horrible to try to get an answer out of. Weeks are going by and I still have no idea when I'll receive those things. I'm also moving in a couple of weeks, further complicating it.

Just wondered if others are having the same issue with this company. Does someone else carry them ?

Steve

[SARGE..g-47]

For those of us (probbaly just me) not in the know... what is a TS "PAL"?

And.. where did you order it from and have they charged your CC?

[cabinetman]

For those of us (probbaly just me) not in the know... what is a TS "PAL"?

And.. where did you order it from and have they charged your CC?

http://www.in-lineindustries.com/saw_pals.html
.

[russd]

I have seen them at my local Woodcraft( Rockville MD) might try a Woodcraft in your area.

[ssmith1627]

Sorry for not posting the link showing what they were. Wrong to assume everyone would know what I was talking about.

I couldn't find them on the Woodcraft site some time ago so I assumed they no longer carried them. I'll try here locally and see if they have the item. Thanks for the idea.

And no, no charge to my card. Just frustrating when I do actually want the thing.

Steve

[MikeMcCoy]

I couldn't find it on the Woodcraft site when I was looking awhile back so I got mine from Peachtree.

http://www.ptreeusa.com/tablesaw_products.htm

[Knottscott]

I got a set from them about 3 years ago. The PALS got lost in transit around the Holidays, but Inline was great about getting me out another set plus they gave me a free video. IIRC, the owner's name is Jerry Coles....it's a very small operation, and he tours with the Woodworking Show circuit, so he may be on the road. Have you tried calling and email?

[SARGE..g-47]

Thanks for the reply, Cabinetman. The company will be at the Atlanta WW Show tomorrow with a booth. According to their web-site they are slated for all the major shows, so I doubt they are out of business. I'll drop by their booth on Saturday to pay a visit and check em out!

[SARGE..g-47]

Peachtree has them as I saw them at the Atlanta WW Show yesterday. If you haven't got them yet....

[BrazosJake]

They're pretty sweet, I bought a pair and mounted on my old Emerson-built craftsman. Only downside to putting them on this saw is the bracket that the blade-guard & splitter attach to has to be removed to permit the 45-degree tilt (no real loss, since the saw had neither piece, anyway).

[Knottscott]

Peachtree has them as I saw them at the Atlanta WW Show yesterday. If you haven't got them yet....

The last time I saw the "Jerry" from I-I, he was demoing the new Freud Fusion blade for Peachtree at a show. The Peachtree folks may know his status.

[rh111]

He was just at the show in KC last weekend. Went looking for his web site yesterday and it came back with a message about the domain name not being registered. I bought a PALS for my Delta at the WW show while I was there thru Peachtree and have seen them online thru them as well.

[SARGE..g-47]

The last time I saw the "Jerry" from I-I, he was demoing the new Freud Fusion blade for Peachtree at a show. The Peachtree folks may know his status.

Being an idiot by nature.. Jerry from I-I does not ring a bell off-hand DM?

But.. if you will de-code for this mentally challenged old man, I will ask Dave as I am at Peachtree at least once a week to pick up something. They are about 15 minutes away and convenient. I was there yesterday as a matter of fact to pick up a piece of track for a new taper jig.

And now that you really have my attention.. who is Jerry as it sounds as if I should know that and very well may if I can put the pieces of the puzzle together?

Regards...

[Knottscott]

Being an idiot by nature.. Jerry from I-I does not ring a bell off-hand DM?

But.. if you will de-code for this mentally challenged old man, I will ask Dave as I am at Peachtree at least once a week to pick up something. They are about 15 minutes away and convenient. I was there yesterday as a matter of fact to pick up a piece of track for a new taper jig.

And now that you really have my attention.. who is Jerry as it sounds as if I should know that and very well may if I can put the pieces of the puzzle together?

Regards...

Sorry Sarge....that'd be Jerry Cole, owner of In-Line Industries.