Arbor Bushings????

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • brettmansdorf

    #1

    Arbor Bushings????

    Buddy of mine called me from an auction of a closing industrial shop a few thousand miles away and mentioned some equipment I might be interested in.... I really wanted the 14" radial arm saw... You know - to replace the 10" one I have now... Playing fast with wants vs. needs, he bid for me... Won nothing but a box of 10" saw blades (all new) for a whopping $15. He reboxxed and sent me a via flat rate box (so I'm into this for $25)... So although I missed the opportunity to explain why the electric bill was headed north to the wife (and the extra 220 plug), I got some blades - always a good buy...

    Got the box today... UG! It was full of 254mm (10") X 30mm (arbor) blades (14 blades)... A few are 60T, a few 80T...

    Would love to use on my Radial Arm - but BUT BUT... 30MM? RA is 5/8...

    There is a bushing included... But doesn't look like much...

    I've NEVER been down this road...

    Anyone used the industrial blades (1", 1.125", or 30mm) with a "bushing" on a 5/8th arbor before????

    Thanx in advance.
  • leehljp
    The Full Monte
    • Dec 2002
    • 8804
    • Tunica, MS
    • BT3000/3100

    #2
    Vermont American used to offer a pack of bushing adapters and Harbor Freight used to sell them or something similar. I have not been able to find them on their (HF) web site for a couple of years now.

    At Amazon, I found some 1" - 5/8" adapters: Click here! Scroll down to number 6 for the 5/8 - 1 bushings.

    A google search might turn up something. Also, a good local machine shop can make them but the cost might be high.
    Last edited by leehljp; 01-04-2008, 09:21 PM.
    Hank Lee

    Experience is what you get when you don't get what you wanted!

    Comment

    • Uncle Cracker
      The Full Monte
      • May 2007
      • 7091
      • Sunshine State
      • BT3000

      #3
      Originally posted by leehljp
      Vermont American used to offer a pack of bushing adapters and Harbor Freight used to sell them or something similar. I have not been able to find them on their (HF) web site for a couple of years now.
      I saw packs of them on display the last time I was in my local HF. Looked like a few assorted sizes, and some adapters for diamond-shaped holes also. I didn't pay close attention, because I have no use for them myself, but it did catch my eye. I'll try to get the number off them the next time I'm there, and post it to this thread. It may be a while, though, because I'm sure to stay pissed for some time that they're gonna start charging two bucks for the privilege of receiving their mail flyers.

      Comment

      • leehljp
        The Full Monte
        • Dec 2002
        • 8804
        • Tunica, MS
        • BT3000/3100

        #4
        Originally posted by Uncle Cracker
        I saw packs of them on display the last time I was in my local HF. Looked like a few assorted sizes, and some adapters for diamond-shaped holes also. I didn't pay close attention, because I have no use for them myself, but it did catch my eye. I'll try to get the number off them the next time I'm there, and post it to this thread. It may be a while, though, because I'm sure to stay pissed for some time that they're gonna start charging two bucks for the privilege of receiving their mail flyers.
        I keep a pack of those around to use as spacers. Great spacers and manufactured to good tolerances, better than washers.
        Hank Lee

        Experience is what you get when you don't get what you wanted!

        Comment

        • brettmansdorf

          #5
          Actually I have the bushings already - just never used them.

          Wanted to know if there is any difference when using them.

          Comment

          • reddog552
            Established Member
            • Dec 2006
            • 245
            • Belleville Il.
            • Bt3000

            #6
            Industrial blades

            If your arbor washers will work with the bushing (outside of washers capture the blade itself & inside captures the arbor bushing)That was a fantastic buy.
            The bitterness of poor quality lingers long after the sweetness of low cost is forgotten!

            Comment

            Working...