Good day
Nowadays, not much of woodworking...getting ready for the Polish winter so, we are wrapping all the planters with a special cloth that will protect the soil from freezing down to -20°c (-4°f).
so, that's the time to improve some small things around the garage...
For long time I was looking for some "reference line" to set the Drill Press fence distance precisely and today I made it.
I used 8mm rod, measured with caliper but, you can use any diameter.
And, because I used 8mm rod I used 4mm drill bits (half the dia) as you will see
And the rest is on the pics
Regards
niki
Nowadays, not much of woodworking...getting ready for the Polish winter so, we are wrapping all the planters with a special cloth that will protect the soil from freezing down to -20°c (-4°f).
so, that's the time to improve some small things around the garage...
For long time I was looking for some "reference line" to set the Drill Press fence distance precisely and today I made it.
I used 8mm rod, measured with caliper but, you can use any diameter.
And, because I used 8mm rod I used 4mm drill bits (half the dia) as you will see
And the rest is on the pics
Regards
niki
Comment