Jet vs. Tormek Sharpeners

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • Uncle Cracker
    The Full Monte
    • May 2007
    • 7091
    • Sunshine State
    • BT3000

    #1

    Jet vs. Tormek Sharpeners

    I am presently struggling with this decision, as I have an opportunity to purchase a Tormek in excellent shape with a couple accessory jigs for 2 Benjamins. I can get a new Jet unit for about $260. I had heard that the Jet was actually an improvement over the Tormek, but I'm not so sure after reading this side-by-side comparison. I have investigated the Work Sharp system also, but since I have a lot of planer blades wider than 2", this system did not seem as attractive. The HF system just doesn't blow my skirt up either, so I'm still choosing between the Tormek and the Jet. The only knock on the Tormek I've seen with any regularity is the high price, but that is out of the equation for me with this impending deal. I haven't seen any comments that the Tormek does not produce the superior edge. Anybody have some thoughts?
  • leehljp
    The Full Monte
    • Dec 2002
    • 8794
    • Tunica, MS
    • BT3000/3100

    #2
    Here is a link that "seems" to give a slight edge to the Jet because of its variable speed.

    http://www.newwoodworker.com/reviews...ekcomparo.html
    Hank Lee

    Experience is what you get when you don't get what you wanted!

    Comment

    • Jeffrey Schronce
      Veteran Member
      • Nov 2005
      • 3822
      • York, PA, USA.
      • 22124

      #3
      Not going to go wrong either way.. .

      Comment

      • Uncle Cracker
        The Full Monte
        • May 2007
        • 7091
        • Sunshine State
        • BT3000

        #4
        Got it!

        Had to make a decision to avoid losing the deal. Went with the Tormek. Came with the two-sided stone and grading jig for the wheel, the auxiliary leathers and almost every optional jig except the axe rig, most of them unopened in their boxes. Doesn't look like this rig even got used more than twice. Think I got a steal.

        Edit: Yikes! Just added up the cost of the extra accessories I got, and it's almost $500 not including the machine or the standard accessories! Now I'm feelin' a little guilty... There! Not any more...

        Can't wait to shave some hairs off my arm!
        Last edited by Uncle Cracker; 09-24-2007, 03:56 PM.

        Comment

        • bthere
          Established Member
          • Jan 2007
          • 462
          • Alpharetta, GA

          #5
          I think you got an absoulute bargain. The Tormek will last forever and does a fine job. If you got alot of accessories you saved about a million bucks right there.

          Comment

          • Jim Boyd
            Veteran Member
            • Dec 2002
            • 1766
            • Montgomery, Texas, USA.
            • Delta Unisaw

            #6
            Get ya a big box of Band-Aids, you're going to need them Sharpening all of the kitchen knives is good for at least one cut and no hair left on your arms
            Jim in Texas and Sicko Ryobi Cult Member ©

            Comment

            • Ken Massingale
              Veteran Member
              • Dec 2002
              • 3862
              • Liberty, SC, USA.
              • Ridgid TS3650

              #7
              What a score!
              Unc, when you run out of arm hairs and start using other body parts we will gladly drop the 'no pics didn't happen' rule.

              Comment

              • Uncle Cracker
                The Full Monte
                • May 2007
                • 7091
                • Sunshine State
                • BT3000

                #8
                Originally posted by Ken Massingale
                What a score!
                Unc, when you run out of arm hairs and start using other body parts we will gladly drop the 'no pics didn't happen' rule.
                Smart move, Ken...

                Comment

                Working...