Saw Kerf?

[Wood_workur]

if anyone has this 4" saw http://www.rockler.com/product.cfm?page=5323
and a pair of calipers, could you please measure the kerf of the blade.

[leehljp]

Alex,

I don't have a clue myself but by going here:

http://www.crownhandtools.ltd.uk/contact_us.asp
- you can contact them.

Be sure to include the model number of the saw that you are asking about.

[Ken Massingale]

Alex,
This is from the Woodcraft site:
"Brass Backed “Gent’s Saw” has a 1/2" wide brass back and brass ferrule. Its Sheffield steel blade has a polished finish that glides through wood. 8" blade has a 1-3/4" depth of cut. 20 TPI with .049 kerf."

http://www.woodcraft.com/family.aspx?familyid=843

Oops, you're looking at the 4" one, sorry.

Our friend brian at Holbren has the 4" Gents. Maybe he will provide the kerf. His is cheaper than Rockler, too.

[Holbren]

Alex,
This is from the Woodcraft site:
"Brass Backed “Gent’s Saw” has a 1/2" wide brass back and brass ferrule. Its Sheffield steel blade has a polished finish that glides through wood. 8" blade has a 1-3/4" depth of cut. 20 TPI with .049 kerf."

http://www.woodcraft.com/family.aspx?familyid=843

Oops, you're looking at the 4" one, sorry.

Our friend brian at Holbren has the 4" Gents. Maybe he will provide the kerf. His is cheaper than Rockler, too.

IIRC, I have 4" to 10" and I'll measure if I can remember.