Campbell Hausfeld HV2011 HVLP

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • cgallery
    Veteran Member
    • Sep 2004
    • 4503
    • Milwaukee, WI
    • BT3K

    #1

    Campbell Hausfeld HV2011 HVLP

    I wonder if there is any difference between the Campbell Hausfeld HV2011 HVLP system I purchased on Craigslist, and the one Rockler/HF sell.

    This page contains some specs on the 2011 systems:
    http://www.jackssmallengines.com/ch_hvlpsprayer.cfm

    I was all ready to buy the HF unit but then decided the Critter Sprayer may be a better match for many of my projects. I then saw an ad for the CH HVLP on Craigslist for $75. It was NIB. And the seller was closer than my HF store, and close to another stop anyway.

    So I went and bought the CH unit. It has a metal cup and gun. The hose is black. And it has a nicely done manual. But the overall shape is pretty similar to the HF/Rockler unit.

    I hope this one works at least as good as the HF unit.

    Is Campbell Hausfeld stuff any good?
    Last edited by cgallery; 07-15-2007, 09:25 PM.
  • gwyneth
    Veteran Member
    • Nov 2006
    • 1134
    • Bayfield Co., WI

    #2
    Originally posted by cgallery
    I hope this one works at least as good as the HF unit.

    Is Campbell Hausfeld stuff any good?
    In general, I'd take Campbell Hausfeld over HF-brand any time. CH is one of the country's largest manufacturers of air compressors, air tools, and spray systems.

    I had a huge CH airless spray system seven or eight years ago--the kind that can spray a five-gallon drum of latex in about an hour. It was a Home Depot "formerly rented" unit, which was priced at $105 (as opposed to the same system new for upwards of $550.)

    It wasn't even rebuilt, though they might have put a new tip on it. It worked great and as far as I know is still working. But if it could survive all the abuse a rental tool takes--particularly something that's somewhat arcane, and depends on a thick fluid flowing through a very small opening--that says great things.

    I've also had several CH air compressors, which were fine, and assorted CH impact wrenches, drills, and scalers.

    For some reason, some Wal-marts always have a few CH clearance items in a cart in the automotive department--guess it's when CH changes boxes and the old stock looks out of place.

    Comment

    • JTimmons
      Senior Member
      • Feb 2005
      • 690
      • Denver, CO.
      • Grizzly 1023SLX, Ryobi BT3100

      #3
      Originally posted by cgallery
      Is Campbell Hausfeld stuff any good?
      I got a year free of Workbench magazine the June 07 issue highly recommended their HVLP. Pretty good article on them and how to thin out paint as far as I can tell anyway (haven't tried it yet).
      "Happiness is your dentist telling you it won't hurt and then having him catch his hand in the drill."
      -- Johnny Carson

      Comment

      Working...