Router Guide Bushing Needed

[BrazosJake]

It probably wouldn't be that hard to get a machine shop to turn a 7/16" OD bushing down to 13/32". In a pinch, I've made donuts out of 1/4" hardboard that slip over a smaller bushing, using a holesaw then drilling out the center hole to match the bushing it would go on. But that wasn't for a DT template and I don't know of a 13/32" hole saw.

[Ken Massingale]

Why not just make a new base plate? Or am I missing something?

Jeff,
The goal is to be able to use PC style bushings with the Craftsman dovetail jig instead of the weird Craftsman bushings.

It probably wouldn't be that hard to get a machine shop to turn a 7/16" OD bushing down to 13/32". In a pinch, I've made donuts out of 1/4" hardboard that slip over a smaller bushing, using a holesaw then drilling out the center hole to match the bushing it would go on. But that wasn't for a DT template and I don't know of a 13/32" hole saw.

Jake,
I was ready to turn down a 7/16 to .400 then received the email from Wood magazine that the bushings will be available, so I guess I'll wait on those. Thanks.

[Jeffrey Schronce]

Jeff,
The goal is to be able to use PC style bushings with the Craftsman dovetail jig instead of the weird Craftsman bushings.

Right. Just hit me what you meant. You are looking for a PC Style bushing in some weird size.