Circular Saw cutting guide

[niki]

Good day

The CS guide is very old idea, so what is new…

I used “Floor Panels” to make the guide, already covered with plastic laminate (Formica) and if I have 15 years guaranty for walking on them, for sure they are good to use as a guide.
They are available at 50” or 100” (I use the 50”).

I use a little bit different measuring and marking method (I don’t like pencil marks).

If the board, that you are going to cut, is not square, you can use a T square (see “T square” post), for the initial marking (I used framing square in the pictures).

Regards
Niki

[niki]

[jhgrady]

Niki:

This is just what I've been looking for.

Thanks for the post.


John

[lcm1947]

I like the idea of using the flooring. That should be really nice and slick. I never have been really happy with using plywood even with a couple of coats of paste wax. I'll have to try the flooring. Neat idea!