Anyone familiar with this product?: http://pro.woodworker.com/cgi-bin/FU...ARTNUM=109-020
If so, I would appreciate any feedback.
My application is to strip the varnish/glaze off cabinet doors without going down to the bare wood - just enough to give me a good surface to paint on. The doors are both raised and sunken panels with beading and small corners. At this stage, I do not want to get into the expense of something like a Fein Multimaster, but I do need to get beyond hand sanding with rubber contour sanding blocks.
Thanks in advance.
(Loring, I'm not from Texas, but your advice is always welcome as usual!)
If so, I would appreciate any feedback.
My application is to strip the varnish/glaze off cabinet doors without going down to the bare wood - just enough to give me a good surface to paint on. The doors are both raised and sunken panels with beading and small corners. At this stage, I do not want to get into the expense of something like a Fein Multimaster, but I do need to get beyond hand sanding with rubber contour sanding blocks.
Thanks in advance.
(Loring, I'm not from Texas, but your advice is always welcome as usual!)