Hitachi ROS

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • Chadwick
    Forum Newbie
    • Sep 2005
    • 76
    • Central Texas

    #1

    Hitachi ROS

    Hey All;

    Wondering if anyone has used the new Hitachi ROS. I have a DW421, but am considering something else, because I don't like replacing the plastic anti spin piece often. Looked at it at Lowes, but have not seen much about them yet. They seem reasonably priced. I have the 1/4 sheet Hitachi wich I like. Also considering the Bosch or the Mikita.

    Thanks,

    Chadwick
  • vaking
    Veteran Member
    • Apr 2005
    • 1428
    • Montclair, NJ, USA.
    • Ryobi BT3100-1

    #2
    I like Hitachi in general, I did not try Hitachi ROS but I have and like Ridgid ROS. Many people have it and I have heard nothing but good about it.
    Alex V

    Comment

    • drumpriest
      Veteran Member
      • Feb 2004
      • 3338
      • Pittsburgh, Pa, USA.
      • Powermatic PM 2000

      #3
      I have the Bosch ROS, came free with my jigsaw. It's a good enough sander, but getting it hooked up to dust control was an issue. I had to special order an adapter from Bosch, and then use a step adapter from the Bosch adapter to my shop vac.

      The reason I did this? While the pleated filter built onto the sander is a good idea in theory, you'd have to actually get the dust into that chamber first, which it failed to do.

      Sands very nicely now though, and very clean with a shop vac hooked to it.
      Keith Z. Leonard
      Go Steelers!

      Comment

      • Chadwick
        Forum Newbie
        • Sep 2005
        • 76
        • Central Texas

        #4
        Thanks guys. Have looked at the Rigid and like it. Also looking at the new Dewalt model, and will find out more about it. My main issue with the Dewalt 421, is the plastic anti spin piece that wears out, and has to be replaced. Other than that, it is comfortable to use, and does a nice job.

        Chadwick

        Comment

        Working...