Tweet
The company I work for manufactures scales and some of them are customs for portability. We had a large order of 5 custom scales that were specified for our customer and just after we bought all of the custom materials the customer up and cancels the order. Because of the terms of the contract the customer pays for the materials already bought. Well to my good fortune there were 20 of the following casters bought for these portable scales. Now we have no use for them, so i asked my boss if I could purchase them at a discounted rate as the company had already been paid for them when the order was cancelled. So I bought 20 of these casters for $3.00 each, as opposed to $8.95 from our supplier.
4" x 1-1/4" SWIVEL PLATE CASTER
New, swivel plate caster. Red polyurethane-over-polyolefin wheel. Delrin sleeve axle bearing, ball bearings on swivel. Brake locks swivel and wheel.
SPECIFICATIONS
4" dia. x 1-1/4" wheel
Mounting height 5-1/2"
125 lb. load capacity
3-5/8" x 2-3/8" x 1/8" thick top plate
Four bolt mount on 3" x 2" centers
3/8" dia. bolt holes
Shpg. 4 lbs.
Now I am set to start building all of my mobile bases.
4" x 1-1/4" SWIVEL PLATE CASTER
New, swivel plate caster. Red polyurethane-over-polyolefin wheel. Delrin sleeve axle bearing, ball bearings on swivel. Brake locks swivel and wheel.
SPECIFICATIONS
4" dia. x 1-1/4" wheel
Mounting height 5-1/2"
125 lb. load capacity
3-5/8" x 2-3/8" x 1/8" thick top plate
Four bolt mount on 3" x 2" centers
3/8" dia. bolt holes
Shpg. 4 lbs.
Now I am set to start building all of my mobile bases.
Welcome to the school of life
Comment