Cold Climate Glue?

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • Bulkley
    Forum Newbie
    • Oct 2005
    • 86
    • British Columbia, Canada.

    #1

    Cold Climate Glue?

    Do any of you cold climate guys have a favorite wood glue? I don't have the luxury of a properly heated shop, although it's usually above freezing. Still, I have to apply paints, glues, etc. at below spec temperatures for a few months every year. Any favorites? In my present location, extra heat is not an option.
  • bigfoot15
    Established Member
    • Oct 2005
    • 127
    • edmonton, alberta, Canada.
    • BT3100

    #2
    Lee Valley (and other places I'm sure) sell a couple of epoxy products (I think it is called C2, bought some, but haven't used it yet) that are good to -2C with a 24 hr cure time.
    If you're in the fraser valley, you should be OK with that mostly year round.

    I will be looking for replies here with interest myself.

    I have the same issue here in Edmonton, but am working feverishly to get my garage insulated.
    (You should feel sorry for me, **** cold today -5C with 20-30kph winds).


    patience is a virtue I can\'t wait to have

    Comment

    • Bulkley
      Forum Newbie
      • Oct 2005
      • 86
      • British Columbia, Canada.

      #3
      For some reason, I usually make a mess with epoxy. I'm a lousy cook too.

      I used to live in a place that got so cold that the drive belt on my table saw would freeze and I had to take in inside and thaw it out before I could run the saw. That shop actually had heat!

      Comment

      Working...