Well, the panel in question is not a door, it's to be mounted on a wall. Also, it's maple, no stain, finished with super blonde shellac and wiping poly. Humidity around here does vary quite a bit by season, so that may be an issue.
What I've done so far is finish the panel and one coat of shellac on the inside of the frame (I marked where the glue will be, so no finish there). Tomorrow's project is assembling the frame and panel, then another coat of shellac on the frame, followed by poly.
After that, only four more panels to go. Pics when I eventually finish.
Thanks to all for the advice.
g.
What I've done so far is finish the panel and one coat of shellac on the inside of the frame (I marked where the glue will be, so no finish there). Tomorrow's project is assembling the frame and panel, then another coat of shellac on the frame, followed by poly.
After that, only four more panels to go. Pics when I eventually finish.
Thanks to all for the advice.
g.
Comment