lacquer over paint

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • Rand
    Established Member
    • May 2005
    • 492
    • Vancouver, WA, USA.

    lacquer over paint

    I just stenciled a friends initials on a project with spray paint.

    In the past I have successfully covered a spray painted surface with spray poly.

    I was thinking about using Deft lacquer on this project.

    Is there anything in the lacquer that could cause the spray paint to run?
    Rand
    "If all you have is a hammer, everything looks like your thumb."
  • cabinetman
    Gone but not Forgotten RIP
    • Jun 2006
    • 15216
    • So. Florida
    • Delta

    #2
    Originally posted by Rand
    I just stenciled a friends initials on a project with spray paint.

    In the past I have successfully covered a spray painted surface with spray poly.

    I was thinking about using Deft lacquer on this project.

    Is there anything in the lacquer that could cause the spray paint to run?

    If the spray paint isn't lacquer, expect a reaction. Whatever the paint is, it could just get crinkly, deform, separate, lift, not necessarily "run".
    .

    Comment

    • Rand
      Established Member
      • May 2005
      • 492
      • Vancouver, WA, USA.

      #3
      Thanks C-man

      I ended up just using polyurethane. I could have tested the paint/lacquer combo on some scrap but I just wanted to get the project done.
      Rand
      "If all you have is a hammer, everything looks like your thumb."

      Comment

      • woodturner
        Veteran Member
        • Jun 2008
        • 2047
        • Western Pennsylvania
        • General, Sears 21829, BT3100

        #4
        Originally posted by Rand
        Is there anything in the lacquer that could cause the spray paint to run?
        The solvent in lacquer is lacquer thinner, a different solvent than most other paints. Unless the spray paint was lacquer, it should be fine. If it was lacquer, though, if the clear coat is applied "wet" enough, it could cause the paint to soften and possibly run.
        --------------------------------------------------
        Electrical Engineer by day, Woodworker by night

        Comment

        Working...