Working on Shop Notes' knockdown workstation. Have to laminate two 3/4-inch panels together. Lots of clamps needed. Almost all I have.
Bill
Bill
-
So little time, so much wood! -
Afternoon BM..
Probably should have caulded it in your case to save running on empty..
How many clamps are enough? ................ One more than you need!
Problem with that is you always come up one short... :>)
Regards... -
Wouldnt a few screws have done the trick?YOU DONT HAVE TO TRAIN TO BE MISERABLE. YOU HAVE TO TRAIN TO ENDURE MISERY.Comment
-
Quality is perhaps just as important as quanity and you do have quality. Quanity can be added by the lower end clamps now. You may find many uses for hardware store generic "F" clamps or even those sold by HF. That may round out your selection if you are so inclined. Although if you can afford to add even more K bodies there ain't much wrong with that either IMHO.
I also agree that the definition of "enough" is one too many but like most I seem to always be about 3 short.
Donate to my Tour de Cure
marK in WA and Ryobi Fanatic Association State President ©
Head servant of the forum
©
Comment
Comment