Will you please build something!

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • ironhat
    Veteran Member
    • Aug 2004
    • 2553
    • Chambersburg, PA (South-central).
    • Ridgid 3650 (can I still play here?)

    #1

    Will you please build something!

    That would be the wife requesting that. So, she has decided on a shoe rack as we enter the back door. I decided to make the ends like raised panel doors to match the cabinets. There's the problem. I don't have raised panel bits and buying a set right now is a point of contention. I read up on using the TS for cutting the relief around the panels and I can't imagine it coming out very smooth - lots of sanding imagine. OK, I'll live with that. Now, how can I match the recessed bead that goes around the inside of the door frame. I have a set of 35-bits-you'll-seldom-use and the bead bits are far larger than called for. So, what do you think? Cut a bead with what I have and cut it down on the TS? The little lady says, "Don't bother with it. Nobody but you will notice.
    Thought?
    Chiz
    Blessings,
    Chiz
  • JoeyGee
    Veteran Member
    • Nov 2005
    • 1509
    • Sylvania, OH, USA.
    • BT3100-1

    #2
    Go with LOYL. Keep it simple and cut the panels on the TS. Just go out and cut the panels and stop worrying about it already : )

    She will be happy with the results (and if not, blame the lack of tools, LOL). When it comes out well, she will be more likely to approve more tools in the future.
    Joe

    Comment

    • steve-norrell
      Veteran Member
      • Apr 2006
      • 1001
      • The Great Land - Alaska
      • BT3100-1

      #3
      From the "for what its worth department" in Newbie Land . . .

      I would agree with Joey Gee but I thought it was against forum rules to begin a new project unless it justified at least one new tool. Where did I go wrong?

      Seriously, it has also been suggested to me that we need a shoe rack of some kind in the garage. I will look for a picture of the final product.

      Regards and
      Merry Christmas to all
      SN

      Comment

      • JR
        The Full Monte
        • Feb 2004
        • 5636
        • Eugene, OR
        • BT3000

        #4
        Originally posted by ironhat
        Now, how can I match the recessed bead that goes around the inside of the door frame.
        I wouldn't go for a perfect match. It's more hassles than it's worth.

        If you've got a beading bit, use it. The design will be consistent with what's there, and therefore it will fit right in.

        JR
        JR

        Comment

        • ironhat
          Veteran Member
          • Aug 2004
          • 2553
          • Chambersburg, PA (South-central).
          • Ridgid 3650 (can I still play here?)

          #5
          Originally posted by steve-norrell
          From the "for what its worth department" in Newbie Land . . . <snip>

          Seriously, it has also been suggested to me that we need a shoe rack of some kind in the garage. I will look for a picture of the final product.

          Regards and
          Merry Christmas to all
          SN

          Well, that's where I went wrong, Steve. I justified teh need for one or more tools and then, didn't come thru with the project. That puts me about 6 tools over my deserved ration. I'm cooked - I have to produce. I get to being a perfectionist . Haven't done some of the more advanced joinery so I fear the new project and it's unknown processes. When things come out less than perfect I get cheezed a myself. Well, off into the unknown. I believe I'll slap together a practice panel first - gulp!
          Later
          Chiz
          Blessings,
          Chiz

          Comment

          • jackellis
            Veteran Member
            • Nov 2003
            • 2638
            • Tahoe City, CA, USA.
            • BT3100

            #6
            My wife is a perfectionist so I'm always worried about the small mistakes I make. Guess what? She's been anywhere from pretty ****ed pleased to ecstatically happy with everything I've built so far, no matter how badly it turned out. Even the really crappy wine racks I built out of cheap plywood so bottles under our garage cabinets wouldn't spill all over that are now coming apart.

            At this point, you need to be more worried about producing than perfection. Go build the shoe rack... and don't forget to post pics.

            Comment

            • cabinetman
              Gone but not Forgotten RIP
              • Jun 2006
              • 15216
              • So. Florida
              • Delta

              #7
              Just a tip for cutting the bevel for the panel. Set up a tall fence guide so the panel has support while it gets cut. Don't cut the whole bevel at once. Leave the last pass to just trim a smidgen (that's a technical term for a little bit) off. That pass should be pretty clean.

              As for the size of the bead, some bits you can get away without using the whole profile, only part of it. Or, cut down if necessary.



              A THING OF BEAUTY IS A JOY FOREVER - John Keats

              Comment

              • ironhat
                Veteran Member
                • Aug 2004
                • 2553
                • Chambersburg, PA (South-central).
                • Ridgid 3650 (can I still play here?)

                #8
                Good tip, C.man. My hesitation about cutting down a bead is the safety issue. Have any of you made a cove cut by passing the wood a little off perpendicular to the blade. I also found this http://home.earthlink.net/~us71na/raisedpanel.html which recommends a veining cut to define the raised portion of the panel. Then, you saw up to that and it leaves a more finished look. My concern with using this or a regular straight, angled profile is getting the proper edge dimension to coincide with the other end of the cut at the raised panel. Also, the edge will have to be more narrow than the rabbet in the rails and stiles is to allow the panel to inset and then taper upward slightly to then fit that rabbet (Sorry, don't know how to put that better). How much wider than the inside dimension of the frame should I shoot for with this sort of construction. I'll bet I'm overthinkng this as usual which is why I don't tend to venture into new territory.
                TA,
                Chiz
                Blessings,
                Chiz

                Comment

                Working...