Sold, thanks for your interest.
JDS Dust Force dust collector, good condition, has only seen light use in hobby workshop. Local sale only, Ardmore PA 19003, $200 firm.
DC is currently set up to use a 0.5 micron canister filter that is a consumable item you'll need to replace unless you decide to use it with the brand-new 1.0 micron bag-type filter that I'll include in the sale. Compare links below.
Also for sale, 4" dust collection accessories in good condition (some never used). If you want any of these to use with the DC, I'll let 'em go for about half of what they'd cost new--
two 10' x 4" clear flex hoses (because the inlet of the DC has two 4" ports, so you can collect from the top and bottom of your table saw or router table)
one 4" x 36" "rigid flex" hose, new in box
three screw-in quick release ends for the clear hoses
two thumb-screw band clamps for the hose and one regular band clamp
two 45 degree elbows
two "wye" branches that let you run a 4" hose and a 2 1/2 inch hose into a single 4" hose
three quick-release connectors for the elbows and wye branches
one reducer from 4" to 2 1/2"
one 12" x 12" flanged 4" port
one 8" x 10" flanged 4" port
two 8" x 8" flanged 4" ports
Thanks for your interest.
--John
JDS Dust Force dust collector, good condition, has only seen light use in hobby workshop. Local sale only, Ardmore PA 19003, $200 firm.
DC is currently set up to use a 0.5 micron canister filter that is a consumable item you'll need to replace unless you decide to use it with the brand-new 1.0 micron bag-type filter that I'll include in the sale. Compare links below.
Also for sale, 4" dust collection accessories in good condition (some never used). If you want any of these to use with the DC, I'll let 'em go for about half of what they'd cost new--
two 10' x 4" clear flex hoses (because the inlet of the DC has two 4" ports, so you can collect from the top and bottom of your table saw or router table)
one 4" x 36" "rigid flex" hose, new in box
three screw-in quick release ends for the clear hoses
two thumb-screw band clamps for the hose and one regular band clamp
two 45 degree elbows
two "wye" branches that let you run a 4" hose and a 2 1/2 inch hose into a single 4" hose
three quick-release connectors for the elbows and wye branches
one reducer from 4" to 2 1/2"
one 12" x 12" flanged 4" port
one 8" x 10" flanged 4" port
two 8" x 8" flanged 4" ports
Thanks for your interest.
--John
Comment