BT3100 accessories for sale

[rcp612]

Would any of you guys be interested in these?
All are used, not abused.
The router plate and fence/dust collector is $25.00. (The plate was drilled to mount a Hitachi KM12VC until my table was finished)
The miter fence hold-down is $15.00.
The caster set w/ wedges are $15.00.
The black rails, front 28", the rear 24" (don't ask) $25.00.
All prices include shipping to 48 states. Don't know about Alaska, Hawaii, or Canada.
I'm starting to clear out things to downsize about 50% of my shop space into a 9'X12' space.
And, before anybody asks, no, I don't have any of the attaching hardware for these, other than the casters. That stuff has been put to use for other things.

[Leatherneck]

Router plate and fence/dust collector

Would any of you guys be interested in these?
All are used, not abused.
The router plate and fence/dust collector is $25.00. (The plate was drilled to mount a Hitachi KM12VC until my table was finished)
The miter fence hold-down is $15.00.
The caster set w/ wedges are $15.00.
The black rails, front 28", the rear 24" (don't ask) $25.00.
All prices include shipping to 48 states. Don't know about Alaska, Hawaii, or Canada.
I'm starting to clear out things to downsize about 50% of my shop space into a 9'X12' space.
And, before anybody asks, no, I don't have any of the attaching hardware for these, other than the casters. That stuff has been put to use for other things.

If the router plate + accessories are still available....I'll take em!

[pelligrini]

The black rails, front 28", the rear 24" (don't ask) $25.00.

Sorry, I have to ask... WTF?

[rcp612]

Sorry, I have to ask... WTF?

O K, the front is actually 28 1/4" long and the rear is 24 1/2" long.
Does that satisfy you?

[kramer katt]

rails

PM on rails

[rcp612]

As of this A.M the router plate kit and the miter clamp are spoken for.
Thanks guys

[rcp612]

Sorry, I have to ask... WTF?

Sorry about the previous answer.
The rear rail was a "design change" since the dust collection port already installed on my mobile base was right where it shouldn't have been.
You can almost make it out clearly here:

http://www.bt3central.com/attachment...3&d=1255895326


So, I installed the rear rail in 2 sections with about a 4" gap between them deciding that if it ever became an issue, I'd deal with it then. Never became an issue in almost 3 years

[pelligrini]

OK, I remembered seeing that table.

I was trying to figure out a probable explanation other than one of those 'oops cuts'. I just couldn't come up with one.

[rcp612]

The rails are still for sale for $25.00 shipped.
All else as beensold. Thank you guys!