Ever since I tried a friend's 80T Hi-ATB blade a couple of years ago, I've wanted one for my saw. Hi-ATB is the cleanest cutting grind available. About 3 weeks ago I finally broke down a bought a brand new CMT 255.080.10 80 tooth Hi-ATB blade that cuts beautifully.
When Amazon dropped the price last week on the 100T Forrest Duraline Hi-ATB to $91.68 (before promos), I couldn't resist and ordered that one too.
I can't keep both blades, so I'm putting this almost new CMT up for sale. $30 plus shipping... (~ $38 shipped) gets a blade that has been used very briefly on some 1/2" maple for a jewelry box....roughly 12-15 linear feet at most. It's looks new and I suspect you'll have a tough time telling that it was ever used....no marks, chips, scratches, etc. Original package included. It sells new for between $63 and $91 at various retailers. Awesome for hardwood crosscuts, ply, veneers, laminates, etc.
Techical details:
CMT-255.080.10 255 ITK Fine Finish
diameter:10"
bore: 5/8"
kerf: 0.098
teeth:80
grind:Hi-ATB
hook: 15
bevel: 40
plate: 0.071
Industrial Thin Kerf combines the economy, speed and cutting ease of contractor thin kerf blades with the stiffness, precision and vibration control features usually associated with industrial blades. The ITK fine finish blades are optimized for splinter-free cutting of the most critical mitres, veneered plywood, and other wood products sensitive to chipping. Made in the European Union (not sure whether in Italy or Germany).
$30 plus shipping... (~ $38 shipped). Send PM if interested.
When Amazon dropped the price last week on the 100T Forrest Duraline Hi-ATB to $91.68 (before promos), I couldn't resist and ordered that one too.
I can't keep both blades, so I'm putting this almost new CMT up for sale. $30 plus shipping... (~ $38 shipped) gets a blade that has been used very briefly on some 1/2" maple for a jewelry box....roughly 12-15 linear feet at most. It's looks new and I suspect you'll have a tough time telling that it was ever used....no marks, chips, scratches, etc. Original package included. It sells new for between $63 and $91 at various retailers. Awesome for hardwood crosscuts, ply, veneers, laminates, etc.
Techical details:
CMT-255.080.10 255 ITK Fine Finish
diameter:10"
bore: 5/8"
kerf: 0.098
teeth:80
grind:Hi-ATB
hook: 15
bevel: 40
plate: 0.071
Industrial Thin Kerf combines the economy, speed and cutting ease of contractor thin kerf blades with the stiffness, precision and vibration control features usually associated with industrial blades. The ITK fine finish blades are optimized for splinter-free cutting of the most critical mitres, veneered plywood, and other wood products sensitive to chipping. Made in the European Union (not sure whether in Italy or Germany).
$30 plus shipping... (~ $38 shipped). Send PM if interested.
Comment