Here's the start of my spring cleaning sale. I was originally supposed to be raising some cash for our 25th anniversary outing in August, but I accidentally bought a new Forrest blade, so now I just need to cover that!
- Hitachi 726101 (sold)- Brand new in original package, 12" 90T ATB fine finish blade w/low hook angle and laser cut anti-noise/anti-vibration slots. 0.110" kerf. Surprisingly nice looking blade. $20.
- Freud LU88M010 (sold) - Brand new in original package, 10" 60T ATB w/15 degree hook angle and 3/32" kerf. Black permashield coating. It's listed as a crosscut blade but the hook angle contributes to very respectable ripping and is an excellent general purpose blades...one of my favorites. $22 LU88 review
- Freud LU86R010 (sold)- 10" 40T ATB w/15 degree hook and 3/32" kerf. Red permashield coating and laser cut anti-noise/anti-vibration slots. Very low use, very clean, in near new/perfect condition with original packaging. This was my backup to my WWII...I've now got so many blades that none get many miles on them. Very good all around blade. $15 LU86 review
- Leitz/Irwin 10" 24T FTG ripper w/20 degree hook and 3/32" kerf. Brand new in original package. German made, very high quality ripper, identical to the $46 HO Schumacher & Sohn blade. This is the same blade that Mike Jackson has been clearancing. I've got 3 and will part with one. The price is the same as Mike's - $10... it's a great bargain and a terrific compliment to one of the above blades...great way to optimize shipping too. See it here
- Leitz 10" 30T (sold) - ATB full kerf w/neg hook. German made, huge teeth, high quality, copper noise reduction plug. Only has ~ 4' linear feet of test cuts on it. $12
- Leitz/Delta Industrial - 8" 24T ATB full kerf w/steep hook. German made, large teeth, high quality. Only has ~ 4' linear feet of test cuts on it. Cuts a tad cleaner than the 10" 24T version. $12
- Older Craftsman miter gauge (sold) w/hold down clamp. Good shape, works great, standard 3/4"x 3/8" bar. $12 Bad pic here
- Misc saw parts from an older Emerson era Craftsman 113.298740 contractor saw. Might fit some Emerson/Ridgid saws too. $6 for all(added 5/29) Delta GR-050 Wet/Dry Utility Grinder - 170 rpm, forward/reverse, tool rest, reservoir. Used, but with very little use. Original box and manual included. It's no Tormek but does the trick. $16
Buyer pays actual shipping via USPS from 14612. Paypal/check/MO. PM me if interested. I may add a few items later...thanks for looking.
Thanks,
Scott
- Hitachi 726101 (sold)- Brand new in original package, 12" 90T ATB fine finish blade w/low hook angle and laser cut anti-noise/anti-vibration slots. 0.110" kerf. Surprisingly nice looking blade. $20.
- Freud LU88M010 (sold) - Brand new in original package, 10" 60T ATB w/15 degree hook angle and 3/32" kerf. Black permashield coating. It's listed as a crosscut blade but the hook angle contributes to very respectable ripping and is an excellent general purpose blades...one of my favorites. $22 LU88 review
- Freud LU86R010 (sold)- 10" 40T ATB w/15 degree hook and 3/32" kerf. Red permashield coating and laser cut anti-noise/anti-vibration slots. Very low use, very clean, in near new/perfect condition with original packaging. This was my backup to my WWII...I've now got so many blades that none get many miles on them. Very good all around blade. $15 LU86 review
- Leitz/Irwin 10" 24T FTG ripper w/20 degree hook and 3/32" kerf. Brand new in original package. German made, very high quality ripper, identical to the $46 HO Schumacher & Sohn blade. This is the same blade that Mike Jackson has been clearancing. I've got 3 and will part with one. The price is the same as Mike's - $10... it's a great bargain and a terrific compliment to one of the above blades...great way to optimize shipping too. See it here
- Leitz 10" 30T (sold) - ATB full kerf w/neg hook. German made, huge teeth, high quality, copper noise reduction plug. Only has ~ 4' linear feet of test cuts on it. $12
- Leitz/Delta Industrial - 8" 24T ATB full kerf w/steep hook. German made, large teeth, high quality. Only has ~ 4' linear feet of test cuts on it. Cuts a tad cleaner than the 10" 24T version. $12
- Older Craftsman miter gauge (sold) w/hold down clamp. Good shape, works great, standard 3/4"x 3/8" bar. $12 Bad pic here
- Misc saw parts from an older Emerson era Craftsman 113.298740 contractor saw. Might fit some Emerson/Ridgid saws too. $6 for all
- 3-3/4" x 14" throat insert - red, steel, thin, holddown screw
- "Exact-I-Cut" insert, yellow, ~ 1.5" diameter
- front and rear trunnions
Buyer pays actual shipping via USPS from 14612. Paypal/check/MO. PM me if interested. I may add a few items later...thanks for looking.
Thanks,
Scott
Comment