Tweet
Have to sell everything (just about). Have taken a “travelin’ job” and will not have time to use what I have. This is a complete home WW shop set up. Everything is priced right. The total is $2,856. For everything that sells here I will donate 10% to BT3 Central support. I have certainly benefitted vastly from the knowledge and willingness to share that everyone exhibits on this site.
Here is the problem. I don’t have time to take care of shipping this stuff. Buyer must be willing to pick up or I will deliver locally in the Dallas-Ft. Worth area. (Buyer needs to p/u the big stuff, I don’t have a truck)
Please email me at rwebb98@yahoo.com if you are interested. I am going to be on the road for the next few days so if you responded I will reply as soon as I can. Reply will be answered in order received.
Thanks for looking.
Bob Webb
Ryobi Extention table still in box w/all hardware. $45.00 SOLD
(2) Rockler T-Track kits $12.00
Rigid 14” Bandsaw w/6” riser kit (not installed), Rocker table w/fence and resaw attachment. Used 1 time for test cut. $275.00SOLD
Freud 3 ¼ HP router model FT2000E VS plunge router, table and w/micro-adjustable fence kit and instructional CD still in box. $250.00 SOLD
Craftsman RAS (older version) w/recall repair kit including new table. I have all manuals and wrenches. $150.00
Rigid 6 1/8” jointer (never used) w/2 sets of replacement blades. On Rockler mibile base. $290.00 SOLD
Dewalt DW735 Planer w/infeed and outfeed attachments. Never used. $400.00 SOLD
Rigid OSS sander with all attachments $125.00 (minimal use) and the following sandpaper tubes: SOLD
(2) 80 grit sets, ½, ¾, 1”, 1 ½, 2”, and 3” tubes
(1) 50 grit set w/same sizes
(1) 2 pack of 1”-50 grits tubes
(10) 2 packs of 1”-150 grits tubes
(3) “ 1/2”-150 grit tubes
(4) “ ½” -50 grit tubes
(3) “ ¾”- 50 grit tubes
(25) “ ¾” 150 grit tubes
Hitachi C12LCH 12” CMS w/Laser guide. $250. (light use)
Kreg 2000 Pocket Hole Jig (older version) w/extra clamps. $95.00 (Used once)
GMC Biscuit Jointer (still in box) $50.00
HF 2HP dust collector runs good. $125.00 SOLD
Rockler Dovetail Jig w/through dovetail template. (never used) $75. (never used)
PC 347K corded Circle Saw (used maybe 4 times). $60 w/case
Makita Belt Sander 9903 used 2 times w/15 extra belts $85 SOLD
PC 7529 VS Plunge Router (used 3 times) w/case $75
Makita 3606 1HP router (never used) $40.00 SOLD
40,000 BTU Forced Air Propane Heater $75.00
Clamps 100 @ $2.00 each—Mostly HF and Record bar clamps. Sizes from 12-36”. Many never used) Some Irwin Quick Grip 12” bar clamps, about 15 Irwin and Kobalt spring clamps. This is a BARGIN
(5) sets of Rockler Gluing Cauls $75
(2) Homier mobile bases. Fixed size 21X27 (?) can not be adjusted. $25.00
Pony 7” woodworking vise (Woodcraft) $25.00
Craftsman Router Fence $27.00
(1) Solid core exterior door that can be used for work bench. $15
Here is the problem. I don’t have time to take care of shipping this stuff. Buyer must be willing to pick up or I will deliver locally in the Dallas-Ft. Worth area. (Buyer needs to p/u the big stuff, I don’t have a truck)
Please email me at rwebb98@yahoo.com if you are interested. I am going to be on the road for the next few days so if you responded I will reply as soon as I can. Reply will be answered in order received.
Thanks for looking.
Bob Webb
Ryobi Extention table still in box w/all hardware. $45.00 SOLD
(2) Rockler T-Track kits $12.00
Rigid 14” Bandsaw w/6” riser kit (not installed), Rocker table w/fence and resaw attachment. Used 1 time for test cut. $275.00SOLD
Freud 3 ¼ HP router model FT2000E VS plunge router, table and w/micro-adjustable fence kit and instructional CD still in box. $250.00 SOLD
Craftsman RAS (older version) w/recall repair kit including new table. I have all manuals and wrenches. $150.00
Rigid 6 1/8” jointer (never used) w/2 sets of replacement blades. On Rockler mibile base. $290.00 SOLD
Dewalt DW735 Planer w/infeed and outfeed attachments. Never used. $400.00 SOLD
Rigid OSS sander with all attachments $125.00 (minimal use) and the following sandpaper tubes: SOLD
(2) 80 grit sets, ½, ¾, 1”, 1 ½, 2”, and 3” tubes
(1) 50 grit set w/same sizes
(1) 2 pack of 1”-50 grits tubes
(10) 2 packs of 1”-150 grits tubes
(3) “ 1/2”-150 grit tubes
(4) “ ½” -50 grit tubes
(3) “ ¾”- 50 grit tubes
(25) “ ¾” 150 grit tubes
Hitachi C12LCH 12” CMS w/Laser guide. $250. (light use)
Kreg 2000 Pocket Hole Jig (older version) w/extra clamps. $95.00 (Used once)
GMC Biscuit Jointer (still in box) $50.00
HF 2HP dust collector runs good. $125.00 SOLD
Rockler Dovetail Jig w/through dovetail template. (never used) $75. (never used)
PC 347K corded Circle Saw (used maybe 4 times). $60 w/case
Makita Belt Sander 9903 used 2 times w/15 extra belts $85 SOLD
PC 7529 VS Plunge Router (used 3 times) w/case $75
Makita 3606 1HP router (never used) $40.00 SOLD
40,000 BTU Forced Air Propane Heater $75.00
Clamps 100 @ $2.00 each—Mostly HF and Record bar clamps. Sizes from 12-36”. Many never used) Some Irwin Quick Grip 12” bar clamps, about 15 Irwin and Kobalt spring clamps. This is a BARGIN
(5) sets of Rockler Gluing Cauls $75
(2) Homier mobile bases. Fixed size 21X27 (?) can not be adjusted. $25.00
Pony 7” woodworking vise (Woodcraft) $25.00
Craftsman Router Fence $27.00
(1) Solid core exterior door that can be used for work bench. $15
Comment