bending baseboards

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • uncle al
    Forum Newbie
    • Dec 2002
    • 35
    • CA, USA.
    #1

    bending baseboards

    I posted this a few moments ago, but it disappeared, so this is the second shot.Sorry if it ends up a duplicate.

    I have just about completed replacing and installing a new porcelain tile floor. Part of the finish work includes new baseboards on the floor. I have 2 areas where there is an inside corner with a curve of about 18 inches or so radius. I am planning to install simple baseboards about 2 - 2/12 inches high, with a simple round over on top. I will probably use MDF and paint them.
    Does anyone have any ideas on how best to create the curved portion of the baseboard?

    Any ideas or suggestions will be most welcome.!!
    Thanks

    Alan
    Last edited by uncle al; 11-12-2006, 08:05 PM.
    Uncle Al

    \"There is never enough time to do it right, but there always seems to be enough time to do it over\"
    Tags: None
    • Holbren
      Senior Member
      • Oct 2004
      • 709
      • Orange City, FL.
      #2
      Being you are going to paint them I would kerf cut the back and just fill in the kerf slots at the top with some spackle.

      If you are not familiar, this link may help.

      http://www.ultimatehandyman.co.uk/WO...NDING_WOOD.htm
      Brian
      Holbren, Whiteside, LRH, Ridge, Tenryu, Norton
      "BT310" coupon code = 10% for forum members
      www.holbren.com

        Comment

        Previous template Next
        Working...