Recessed Light Question

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • Greg.B
    Established Member
    • Feb 2006
    • 166
    • Joppa, Maryland
    • Ryobi BT3100

    #1

    Recessed Light Question

    Doing some new construction work, with 6" recessed lights. Will be running 75watt bulbs in them. Just trying to figure out how many can be put on a 15A circuit. The lights will be the only thing on the circuit, no recepticles.

    Similar question. How many recepticles can be put on a 20A circuit ?

    Thanks
    Former Member Name - JohnnyTest
  • os1kne
    Senior Member
    • Jan 2003
    • 901
    • Atlanta, GA
    • BT3100

    #2
    A 75w light fixture uses about .66 amps, so theoretically you can have about 22 75w light fixtures on a 15A circuit. In practice, you should probably leave 25% of wiggle room. (Watts/Volts = Amps)

    How many outlets on a 20A circuit will depend on the load that those outlets are intended for. If the outlets are for a garage/kitchen/stereo system or other power gobbling use, it would be wise to figure out the load of the items that are likely to be used simultaneously and then run circuits to accomodate the electricity needed. You could have 50 outlets on the 20A circuit and not have a problem - but if you tried to power up a table saw and a shop vac/miter saw at the same time, you'd trip the breaker. So if the outlets are for bedroom use that will typically only power a tv, alarm clock, etc. you can probably do 2-3 bedrooms on one 20A circuit, but in a garage it would be wise to do at least 2-3 20A circuits.

    Good luck.
    Bill

    Comment

    • just4funsies
      Senior Member
      • Dec 2005
      • 843
      • Florida.
      • BT3000

      #3
      Leave room to spare on your light circuits, because you'll be burning bulbs out all the time if you push it. The National Electrical Code and your local building department will also have some limitations. Best take them to heed, as your insurance company certainly will if you ever make a claim.
      ...eight, nine, TEN! Yep! Still got all my fingers!

      Comment

      • 91FE
        Established Member
        • Dec 2005
        • 303
        • Philadelphia (actually Souderton), PA.

        #4
        Originally posted by Greg.B
        ...Just trying to figure out how many can be put on a 15A circuit.
        The short answer... more than you want to cut in
        I like Wagoneers too. Hey...they've got wood

        Comment

        • Greg.B
          Established Member
          • Feb 2006
          • 166
          • Joppa, Maryland
          • Ryobi BT3100

          #5
          Thanks guys.

          I've decided on putting 9 on 1 and 7 on another regarding the lights. As for the outlets I am going to split them as well 7 and 5 on different circuits. Almost done with the wiring for the outlets and can't beleive how much wire I've gone thru, almost 250 feet!!
          Former Member Name - JohnnyTest

          Comment

          Working...