Paste wax after Boshield T-9 ?

[newbie2wood]

Just sprayed my jointer surface with T-9 after cleaning the surface of light rust and wax.

I have read that I should reapply a coat or two of paste wax on top of it for extra protection and for extra smoothness. If I do this, will I need to again remove the wax each and every time I want to reapply a coat of T-9 (sound like alot of work)?
________
HERBAL VAPORIZER VAPORITE THE SOLO

[sweensdv]

It actually isn't much work at all. Just wipe the surface down with some mineral spirits to remove the wax.

[mcgrath4u]

Not to steal your post, but where would you purchase the boshield T-9?

[newbie2wood]

T-9 (12 oz can) can be ordered from Grizzly or WoodCraft. I got it online from Hartville Tools.
________
AVANDIA LAWSUITS

[Pappy]

Check with local tool dealers. A lot of them carry T9.

[jnesmith]

quote:Originally posted by mcgrath4u

Not to steal your post, but where would you purchase the boshield T-9?

You can get a combo 3-pack from Rockler. I have it, and all 3 products work very well.

http://www.rockler.com/ecom7/product...erings_id=2380

[Knottscott]

My preference is for a coat or two of wax over the T-9. You're not likely to have to do it more than once or twice a year and it's a 10 minute job.

[RickT]

I agree that it's not too much work, and it's well worth it. I clean the cast iron surface with WD40 or mineral spirits, coat the clean surface with T-9 (that stuff is great!), and apply 2 coats of Johnson paste wax.