Every once in a while I will get some vibration from a saw blade on my 21829. More often than not it will be with my thin kerf 30T Forrest WWII. By vibration I mean that during a cut the blade will wobble slightly leaving some nice teeth marks and an uneven edge. It won't vibrate all the time, just intermittently during a cut. I've tried different feed rates, heights, etc. and I still get it on occasion. It happens very rarely with my full kerf Olshun 24T, or the stock TK blade, or my 60T Dwalt crosscut blade. It'll happen in hardwoods and softwoods, more often in hardwoods though; either rips or crosscuts too.
My Forrest probably needs sharpened, but it happened a few times right out of the box too. I'm wondering if a pair of blade stabilizers might help. They seem like they would be a PIA when I go to to tall cuts. (I hate stopping and changing blades). Any suggestions?
My Forrest probably needs sharpened, but it happened a few times right out of the box too. I'm wondering if a pair of blade stabilizers might help. They seem like they would be a PIA when I go to to tall cuts. (I hate stopping and changing blades). Any suggestions?
Comment