What rag for rubbing finishes?

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • lcm1947
    Veteran Member
    • Sep 2004
    • 1490
    • Austin, Texas
    • BT 3100-1

    #16
    Thanks everybody. I appreciate the replies. Glad I asked.
    May you die and go to heaven before the Devil knows you're dead. My Best, Mac

    Comment

    • mater
      Veteran Member
      • Jan 2004
      • 4197
      • SC, USA.

      #17
      Originally posted by glencross
      personally, i get all the rags i need from the local church thrift shop..they usually go for around two bucks for a full garbage bag full.

      they contain old t shirts etc etc all washed and ready to use in the workshop!!

      cheapest place i know of to get some rags!!
      That is a good idea.
      Ken aka "mater"

      " People may doubt what you say but they will never doubt what you do "

      Ken's Den

      Comment

      • lcm1947
        Veteran Member
        • Sep 2004
        • 1490
        • Austin, Texas
        • BT 3100-1

        #18
        Well I am finally getting around to using some wipe-on poly and was going to purchase some gloves like mentioned by Scotty but " my word! " they are expensive to be disposable. Am I reading that right - one pair for $9.00 and they're disposable? Surely not. I found some at Walmart that are made by Stanley called Nitrile disposable gloves for painting and staining for about $2.97 for a pack of 6 pairs and one pair also made by Stanley at Lowe's for about the same price but they aren't disposable. I guess the single pair would be more protection but a lot more trouble since you'd have to clean them off each time where the disposable ones would sure be handy. Anybody have any knowledge about the two?
        May you die and go to heaven before the Devil knows you're dead. My Best, Mac

        Comment

        • Wood_workur
          Veteran Member
          • Aug 2005
          • 1914
          • Ohio
          • Ryobi bt3100-1

          #19
          Originally posted by lcm1947
          Well I am finally getting around to using some wipe-on poly and was going to purchase some gloves like mentioned by Scotty but " my word! " they are expensive to be disposable. Am I reading that right - one pair for $9.00 and they're disposable? Surely not. I found some at Walmart that are made by Stanley called Nitrile disposable gloves for painting and staining for about $2.97 for a pack of 6 pairs and one pair also made by Stanley at Lowe's for about the same price but they aren't disposable. I guess the single pair would be more protection but a lot more trouble since you'd have to clean them off each time where the disposable ones would sure be handy. Anybody have any knowledge about the two?
          I just wear two pairs of the cheapest I can find. Then one one pair rips, I put on a new pair. They go for about $3 for 50, or $6 for 100.
          Alex

          Comment

          • MilDoc

            #20
            Originally posted by lcm1947
            Am I reading that right - one pair for $9.00 and they're disposable? Surely not. I found some at Walmart that are made by Stanley called Nitrile disposable gloves for painting and staining for about $2.97 for a pack of 6 pairs ...
            The MSC price is $10.25 per 100 = about 10 cents per glove for one box. The Walmart gloves come to over 24 cents per glove. I get mine from MSC also - cheaper, and much better than the Harbor Freight gloves I used to use.

            Comment

            • Ken Massingale
              Veteran Member
              • Dec 2002
              • 3862
              • Liberty, SC, USA.
              • Ridgid TS3650

              #21
              Nitrile gloves are what I use. The blue ones (only color I've seen) can be used multiple times. Pull them off from the cuff which removes them inside-out. Tuck them back outside-out and blow into the cuff to open the fingers.
              HTH
              ken

              Comment

              • lcm1947
                Veteran Member
                • Sep 2004
                • 1490
                • Austin, Texas
                • BT 3100-1

                #22
                Thanks guys but what the heck is Nitrile anyway? Are you guys talking about Nitrile gloves at those prices and quanities?
                May you die and go to heaven before the Devil knows you're dead. My Best, Mac

                Comment

                • gerti
                  Veteran Member
                  • Dec 2003
                  • 2233
                  • Minnetonka, MN, USA.
                  • BT3100 "Frankensaw"

                  #23
                  A word of warning: Any rag used to apply finishing products is a potential fire hazard! If you just crumple them up and chuck them in a bin you are asking for trouble. They have caused quite a few shop fires in Minnesota in the last months alone.

                  Comment

                  • MilDoc

                    #24
                    Originally posted by gerti
                    A word of warning: Any rag used to apply finishing products is a potential fire hazard! If you just crumple them up and chuck them in a bin you are asking for trouble. They have caused quite a few shop fires in Minnesota in the last months alone.
                    Always wondered -- does this apply to water based finishes too? Oil based the reason is obvious.

                    Comment

                    • Jeffrey Schronce
                      Veteran Member
                      • Nov 2005
                      • 3822
                      • York, PA, USA.
                      • 22124

                      #25
                      Originally posted by MilDoc
                      Always wondered -- does this apply to water based finishes too? Oil based the reason is obvious.
                      No its pretty darn safe.
                      The warning does apply to things you wouldn't think of like boiled linseed oil which generates heat as it dries.

                      Comment

                      • jziegler
                        Veteran Member
                        • Aug 2005
                        • 1149
                        • Salem, NJ, USA.
                        • Ryobi BT3100

                        #26
                        I've been getting the nitrile (blue) gloves at Harbor Freight. I found them at Home Depot once or twice, but the price was very high in comparison. I think HF has them on sale for about $8 or 9 for a box of 100 sometimes.

                        As for what is nitrile, which I think someone asked, it is just the material they are made out of. Some rubber substance with better chemical resistance than latex or vinyl.

                        Jim

                        Originally posted by lcm1947
                        Well I am finally getting around to using some wipe-on poly and was going to purchase some gloves like mentioned by Scotty but " my word! " they are expensive to be disposable. Am I reading that right - one pair for $9.00 and they're disposable? Surely not. I found some at Walmart that are made by Stanley called Nitrile disposable gloves for painting and staining for about $2.97 for a pack of 6 pairs and one pair also made by Stanley at Lowe's for about the same price but they aren't disposable. I guess the single pair would be more protection but a lot more trouble since you'd have to clean them off each time where the disposable ones would sure be handy. Anybody have any knowledge about the two?

                        Comment

                        • lcm1947
                          Veteran Member
                          • Sep 2004
                          • 1490
                          • Austin, Texas
                          • BT 3100-1

                          #27
                          Thanks Jziegler I thought maybe it was some kind of coating or something. That's a darn good price. I'll have to check HF out. Need some wooden clamps anyway.
                          May you die and go to heaven before the Devil knows you're dead. My Best, Mac

                          Comment

                          • Jeffrey Schronce
                            Veteran Member
                            • Nov 2005
                            • 3822
                            • York, PA, USA.
                            • 22124

                            #28
                            I think the HF were on sale for less than that. I am think $5-6 - 20% coupon. I have had no problems with them and have used them extensively with some pretty harsh stuff. Just don't use them or latex with stripper. I learned that bout a year ago.

                            Comment

                            • lcm1947
                              Veteran Member
                              • Sep 2004
                              • 1490
                              • Austin, Texas
                              • BT 3100-1

                              #29
                              Ok, now I'm confused. Don't use them with stripper? Why? I would think you could use them for anything. Boy, I have a lot to learn. Glad you mentioned that little piece of info. That's why I love this forum.
                              May you die and go to heaven before the Devil knows you're dead. My Best, Mac

                              Comment

                              • Jeffrey Schronce
                                Veteran Member
                                • Nov 2005
                                • 3822
                                • York, PA, USA.
                                • 22124

                                #30
                                Originally posted by lcm1947
                                Ok, now I'm confused. Don't use them with stripper? Why? I would think you could use them for anything. Boy, I have a lot to learn. Glad you mentioned that little piece of info. That's why I love this forum.
                                Stripper will eat holes through latex or nitrile in seconds. And it burns. Bad.

                                You need chemical resistent gloves based upon recommendation on the can.

                                Comment

                                Working...